Catalog excerpts
Digital Display Proportional Valve Driver A Division of Lynch Fluid Controls NEMA 4X enclosure with clear lid ► Independent adjustments (Incl. ramp up & ramp down) ► 4 digit extra bright seven segment LED display > Large, easy-to-use adjustments and readout ► Display and adjust actual values (Current & Voltage) ► Wide range of supply voltage ► User selectable input type through menu setup ► Wide ramp time range (0 to 99.5 Sec) ► Simple control with analog input, Locally supplied reference voltage ► Energy efficient PWM circuit/no heat sink required ► Current sensing maintains output regardless of changes in supply voltage and coil resistance ► Electronic limiting circuit/short circuit proof ► Reverse polarity, Command Input protection ► Load can be connected & disconnected live ► Mounting: NEMA 4X Plastic Enclosure, PG 09 cable glands ► Easy troubleshooting/cable length not an issue Operating voltage: Maximum output current: Input signal: Maximum ramp time: Operating Temperature: Protection Grade: NEMA 4X (See note on the next page for additional information) Note: Customization of functionality and enclosure type are available on request. PART NUMBER SYSTEM Proportional Solenoid Driver, Single, NEMA 4X enclosure with clear lid Example: LE PIX Contact Us For More Information LEPIX-0212-B Toll Free Local & International Canada USA Online WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION
Open the catalog to page 1NEMA 4X enclosure with clear lid A Division of Lynch Fluid Controls Note: A NEMA rating Round cable with a must be used. Unused cable glands must be properly sealed. Contact Us For More Information Toll Free Local & International 1799 Argentia Road 3940 Olympic Blvd. Mississauga, Ontario L5N 3A2 Erlanger, KY 41018 WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION
Open the catalog to page 2NEMA 4X enclosure with clear lid A Division of Lynch Fluid Controls EXTERNAL INPUT SIGNAL CONNECTION POTENTIOMETER CONNECTION POWER SUPPLY RAMP UP & DOWN ONLY OPERATION POWER SUPPLY PLEASE NOTE: For "0 to 5 VDC" & "0 to 10 VDC" command input drivers, it is recommended to use independent negative conductors for power supply and analogue output channel (PLC/PC) to maintain command signal accuracy due to voltage drop on long cable runs. Contact Us For More Information LEPIX-OIO9- Toll Free Local & International Canada USA Online WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE...
Open the catalog to page 3NEMA 4X enclosure with clear lid A Division of Lynch Fluid Controls TWO WIRE TRANSMITTER INPUT CONNECTION POWER SUPPLY PLEASE NOTE: For "0 to 5 VDC" & "0 to 10 VDC" command input drivers, it is recommended to use independent negative conductors for power supply and analogue output channel (PLC/PC) to maintain command signal accuracy due to voltage drop on long cable runs. €This product has been designed and tested to meet specific standards outlined in the European Electromagnetic Compatibility Directive (EMC) 2004/108/EC Contact Us For More Information LEPIX-OIOQ- Toll Free Local &...
Open the catalog to page 4NEMA 4X enclosure with clear lid Maximum Current output, 0.2 0 to 3.0 0 [Amps] A Division of Lynch Fluid Controls Minimum Current Output, - : COMMAND DEADBAND, Output disabled if command signal less than deadband, to [% 0% 3% 5% command signal [Volts or mA] : DITHER FREQUENCY, Contact Us For More Information Toll Free Local & International WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION
Open the catalog to page 5NEMA 4X enclosure with clear lid A Division of Lynch Fluid Controls (NOTE: Prior to setting up parameters, you must select proper Input Signal setting for your system) Available Input Signal options "'Applying improper Input Signal to wrong setting on the Driver may be damaging to Driver Unit and may cause driver to fault to Error Status mode* At power up, the display will show either the output current signal or the input signal (Default display setting shows the output signal). The decimal point will be flashing. Rotate SELECT to enter the set-up mode When you reach the setting you want...
Open the catalog to page 6All Lynch Fluid Controls Inc. catalogs and technical brochures
-
Manifolds & Valve Packs
133 Pages
-
LE PSX
6 Pages
-
PPX
5 Pages
-
LE PGX
5 Pages
-
Selector Valves
1 Pages
-
2 spped valves
1 Pages
-
Hammer Valve Overview
1 Pages
-
DIN Bodies - Section 8
9 Pages
-
Cover Plates - Section 6
9 Pages
-
Subplate - Section 4
13 Pages
-
Tapping Plate - Section 2
10 Pages
-
Bar Manifolds - Section 1
38 Pages
Archived catalogs
-
Valve Adapters - Section 3
16 Pages