Global Service Concept for the hydraulic- and lubrication industry
10Pages

In addition to our standard program of hydraulic and lubrication filters in the range of INTERNORMEN there are the following INTERNORMEN divisions: For our Fluid-Service-CentersӔwhich are established for certain territories INTERNORMEN offers a comprehensive Service Consulting - including theappropriate products - which requires the following basic proceeding: >

INTERNORMEN`s Fluid > Solutions contain: Setting of targets for contamination classes in regards to particle and moisture contaminationFixing of critical values and alarm settings Preparation of complete interpretations of analyses: size="-2">

Selection of possiblemeasuring points inthe systemInstallationof possiblemeasuringvalves andaccess points INTERNORMEN Supply of correctivecustomer specific solutions offers service devices for sale,leasing or rent >

CCS 2 + BSS 2 / Particle Counter and Bottle Sampling System Online determination of contamination classes according to ISO 4406:1999, NAS 1638and ISO 4406:1987 ׷ Verifies the filter performance Permits "on-condition" laboratory oil analysis ׷ Confirms improved maintenance Verifies pump condition ׷ Determines the cleanliness of stored hydraulic andlubrication fluids Identifies changing atmospheric conditions ׷ Troubleshoots and isolates problems and problematiccomponents Identifies the necessity of spectral analysis ׷ Determines the benefit of offline filter units Determines the optimal...

WAS01 - Water-in-Oil Analyse Set Determines the water content in oils ׷ Determines condensation in the reservoir Identifies damages/leaks of watercooled heat exchangers ׷ Determines the saturation of water absorbing breather filters Demonstrates the effectiveness of water extracting devices ׷ Identifies the effectiveness of cylinder wiper seals PAS01 - Sampling and Oil Analyse Set Serves for receiving inspection of hydraulic and lubrication fluids ׷ Includes mini-measuring connections for simple sampling Determines the condition of operating fluids on site ׷ Identifies the type of...

USP/UST - Off-Line Filter with additional Heat Exchanger Watersorp - Water Absorbing Filter ElementsIFPM/IFPS - Fluid Purifier Systems WSH 01 - Water Analysis Sensor BFD - Desiccant Breather Filter Serves for filtration and cooling of fluids ׷ Improves the oil service life Increases the lubricating properties of operation fluids ׷ Serve for absorption of free and emulsified water from oils Additionally reduce solid contamination ׷ Reduce the oil ageing and deadditivation of fluids Remove free, solved and emulsified water from operation fluids ׷ Remove free and dissolved gases Remove...

Oil Sample Analysis Contamination analysis according to NAS 1638 and ISO 4406:1999 Microscopic particle counting according to ISO 4407 Gravimetric analysis according to ISO 4405 Microscopic contamination analysis Center viscosity (105F) Viscosity - temperature diagram pH-value measurement (only aqueous fluids) Examination of Filter Elements Bubble Point Test according to ISO 2942 Collapse pressure resistance according to ISO 2941 Multi Pass test according to ISO 16889 (new element) p/Q-characteristic according to ISO 3968 (new element) Compatibility with hydraulic fluids according to ISO...