- Catalogs
- Lynch Fluid Controls Inc.
- Electronical Clogging Sensor / Intelligent Filter Control by Electronics
Electronical Clogging Sensor / Intelligent Filter Control by Electronics
Electronical Clogging Sensor / Intelligent Filter Control by Electronics
- Optical and electronic signaling for pressure limit exceedance.
- Easy integration into automatic control systems.
- Continuous contamination control.
- Continuous pressure difference measurement.
- Optimal filter element utilization with high-definition measurement.
- Early contamination detection and cold start indication up to 77°F.
- Pressure peak suppression and dust/splash-proof housing.
- Interference-free signal transmission and compatibility with other clogging indicators.
- Max operating pressure: 6000 PSI.
- Screw thread: G 1/2.
- Distribution voltage: 24V DC ± 20%.
- Temperature range: +14°F to +212°F for fluids, +14°F to +176°F for electronics.
- Output signal: 4...20mA with a max load of 400 Ohm.
- System protection: IP 65 according to DIN 40050.
- Evaluates current signals from VS 1.
- Pressure difference indication via LED-band.
- Includes relay switching contacts and LED indication for switching positions and cold start.
- Adjustable pressure peak suppression.
- Distribution voltage: 24V DC ± 20%.
- Contacts: 2 x contact maker with Umax: 240V AC, Imax: 0.5A, Pmax: 10 Watt.
- Temperature range: 32°F to 158°F.
- System protection: IP 53 (front side only).
Catalog excerpts
Optical and electronical signaling of the exceeding of pressure limitsEasy integration into automatic control systemsContinuous contamination control Electronical Clogging Sensors and Indicating Systems for Hydraulic and Lubricating Oil Filters >
Open the catalog to page 1
Continuous pressure difference measuring Optimal utilization of the filter elements based on a high definition of the measure value within the final measure range Early identification of increased contamination inside the system Cold start indication up to approx. 77F Suppression of pressure peaks Dust-proof and splash-proof aluminium or stainless steel housing Interference-free signal transmission over longer distances Interchangeable with clogging indicators type AE and type AO Type code (ordering example): > 1 2 34 5 6 7 1 VS 1= electronical clogging sensor with analog4...20mAoutput signal...
Open the catalog to page 2All Lynch Fluid Controls Inc. catalogs and technical brochures
Manifolds & Valve Packs133 Pages
LE PSX6 Pages
LE PIX6 Pages
PPX5 Pages
LE PGX5 Pages
Selector Valves1 Page
2 spped valves1 Page
Hammer Valve Overview1 Page
DIN Bodies - Section 89 Pages
Cover Plates - Section 69 Pages
Subplate - Section 413 Pages
Tapping Plate - Section 210 Pages
Bar Manifolds - Section 138 Pages
Archived catalogs
Valve Adapters - Section 316 Pages
- Electrically operated valve
- NC solenoid valve
- Directional control valve
- Hydraulic directional control valve
- NO solenoid valve
- Multi-channel manifold
- Electrically-operated hydraulic directional control valve
- Compact solenoid valve
- ISO solenoid valve
- Hydraulic solenoid valve
- Valve controller
- Solenoid-operated hydraulic directional control valve
- Manifold for hydraulic applications
- Digital valve controller
- Aluminum manifold
- Distribution manifold
- Modular hydraulic directional control valve
- Distribution block
- Custom-made manifold
- Proportional valve controller