SS316 LOW INTENSITY OBSTRUCTION LIGHT As specified by Annex 14 of ICAO regulation, Low Intensity Obstruction Lights (LIOL) should be used to warn the presence of obstacles up to 45m height, such as chimneys, cranes, flares and other structures. Low Intensity Obstruction Lights are the simplest devices according to ICAO standards and they have the following characteristics and uses: • LIOL Type A (intensity >10cd, red steady burning) can be used alone; • LIOL Type B (intensity >32cd, red steady burning), can be used either alone or in combination with medium intensity obstacle lights Type B, Type AB or with high intensity obstacle lights Type AB; • LIOL Type E (intensity >32cd, red flashing), can be used either alone or in combination with medium intensity obstacle lights, Type B. Flashing rate will be set at the same rate of other flashing beacons installed on the structure. [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.

LOW INTENSITY SS316 LIOL-A Ex/LIOL-B Ex LOW INTENSITY OBSRUCTION LIGHT Borosilicate glass dome Stabilised light output: LIOL-A: >10cd LIOL-B: >32cd Based on LED technology Red steady burning light Cable gland M25x1,5 SS316 natural finish body LUXSOLAR L810-LXS-Ex Low Intensity Obstruction Light is fully compliant to ICAO/EASA (Low Intensity - Type A or B), FAA (Type L-810), and ATEX - IECEx certified. The light fixture is designed for hazardous areas Zone 1/21, 2/22 with Ex db IIC and Ex tb IIIC protection, compliant to EN/IEC60079-0, EN/IEC60079-1 and EN/IEC60079-31 standards. With a compact...

SS316 LIOL-A Ex/LIOL-B Ex TECHNICAL SPECIFICATIONS OPTICAL FEATURES APPLY TO • Based on LED technology • RED light - Steady Burning • Horizontal beam radiation: 360° • Vertical beam spread: >10° • Optical reflector • Stack • Offshore Platform • Tower crane petrochemical plant CERTIFICATIONS MECHANICAL FEATURES • ATEX certificate • IECEx certificate • ICAO/EASA test report (EN 17025 marking laboratory) nr. 326-QL20-R05/R06 • CE marking • SS316 natural finish body • Borosilicate glass dome • Degree of protection: IP66 • Operating temperature: -40°C to +70°C • Lamp unit weight: 7kg • ATEX marking:...

LOW INTENSITY SS316 LIOL-A Ex and LIOL-B Ex TECHNICAL SPECIFICATIONS 55 L810-LXS-A Exde average emission level ICAO ANNEX 14 low intensity type A Minimum Required Intensity Vertical Angle L810-LXS-B Exde average emission level ICAO ANNEX 14 low intensity type B Minimum Required Intensity LATERAL VIEW [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.