MEDIUM INTENSITY MEDIUM INTENSITY OBSTRUCTION LIGHT CAP168 According to CAP 168 Medium Intensity Obstruction Lights - Type - have to be used where the obstacle is particulary large and the height is more than 45m, such as telecommunication towers, wind turbines, chimneys, cranes, skyscrapers and other structures. Medium Intensity Obstruction Lights Type C have to be placed at the top of the obstacle to indicate the highest point or edges: Lights must also be placed at intermediate levels with a maximum vertical spacing of 52m; in case of lights installed on towers supporting overhead wires no. 3 levels must be displayed with a maximum spacing of 105m. [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.

MEDIUM INTENSITY MIOL-C CAP168 Patented heat dissipator for optimum cooling Borosilicate glass cover protection Infrared version* Stabilised light output: 2.000cd Based on LED technology Red steady burning light (MIOL-C) Standard circuits or TWIN* Spirit level Optimized optical lens Power connector PLUG&PLAY: IP68/69k Anti-condensation Gore-Tex valve Air-cooling system for +65% heat dissipation Anodised aluminium body note: electronic beacon driver in a separate enclosure LUXSOLAR L864-LXS-200-CAP168 Medium Intensity Obstruction Light is compliant to ICAO (Medium Intensity - Type B or C), FAA...

MEDIUM INTENSITY MIOL-C CAP168 TECHNICAL SPECIFICATIONS OPTICAL FEATURES • • • • • • • Based on LED technology RED light 2.000cd steady burning Cd emission @ -4° and +4° Horizontal beam radiation: 360° Vertical beam spread: 4° PMMA lens Light output alignment device MECHANICAL FEATURES • • • • • • • • • LUXSOLAR Cloud Monitoring System TWIN version: two separate LED circuits in the same fixture (normal + stand-by) Anodised aluminium body, painted RAL7035 Borosilicate glass cover protection Silicon rubber, VMQ Base wind collector and internal heat sink for optimum cooling Degree of protection:...

MEDIUM INTENSITY MIOL-C CAP168 TECHNICAL SPECIFICATIONS SINGLE VERSIONVERSION SINGLE SIDE VIEW SIDE VIEW TWIN VERSIONVERSION TWIN SIDE VIEW SIDE VIEW HORIZONTAL/VERTICAL HORIZONTAL/VERTICAL LEVEL ADJUSTEMENT SCREWS LEVEL ADJUSTEMENT SCREWS BOTTOM VIEW BOTTOM VIEW WITHOUT WIND WITHOUT WIND COLLECTOR COLLECTOR INCOMING POWER SUPPLY CABLE BOTTOMBOTTOM VIEW VIEW BEACON SIDE VIEW RONT VIEW C /W CONNECTOR ( CABLE DIAMETER 8/17mm - MAX. 2,5sqmm) FIXING DETAILS BASE FIXING DETAILS SIDE [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents...