LOW INTENSITY OBSTRUCTION LIGHT As specified by Annex 14 of ICAO regulation, Low Intensity Obstruction Lights (LIOL) should be used to warn the presence of obstacles up to 45m height, such as chimneys, cranes, flares and other structures. Low Intensity Obstruction Lights are the simplest devices according to ICAO standards and they have the following characteristics and uses: • LIOL Type A (intensity >10cd, red steady burning) can be used alone; • LIOL Type B (intensity >32cd, red steady burning), can be used either alone or in combination with medium intensity obstacle lights Type B, Type AB or with high intensity obstacle lights Type AB; • LIOL Type E (intensity >32cd, red flashing), can be used either alone or in combination with medium intensity obstacle lights, Type B. Flashing rate will be set at the same rate of other flashing beacons installed on the structure. [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.

Twilight sensor* Stabilised light output: LIOL-A: >10cd LIOL-B: >32cd LIOL-E: >32cd ► Standard circuits or TWIN* ► Infrared version* Based on LED technology Red flashing light Red steady burning light Borosilicate glass dome IP66 LUXSOLAR L810-LXS-Ex Low Intensity Obstruction Light is fully compliant to ICAO/EASA (Low Intensity - Type A or B), FAA (Type L-810), and ATEX - IECEx - EA^C RU certified. The light fixture is designed for hazardous areas Zone 1/21, 2/22 with Ex db IIC and Ex tb IIIC protection, compliant to EN/IEC60079-0, EN/IEC60079-1 and EN/IEC60079-31 standards. With a compact body,...

OPTICAL FEATURES • Based on LED technology • RED light - Steady Burning • RED light - Flashing (LIOL-E) • Horizontal beam radiation: 360° • Vertical beam spread: >10° • Optical reflector • TWIN version: two separate LED circuits in the same fixture (normal + stand-by) • Automatic changeover from normal to backup light • Fault contact • IR Wavelength - 850nM, compatible with pilot's NVG • Painted RAL 7035 aluminium body • Borosilicate glass dome • Degree of protection: IP66 • Operating temperature: -52°C to +60°C • Lamp unit weight: 7kg • ATEX marking: II 2GD Ex de IIC T4 Gb, Ex tb IIIC T135°C...

LOW INTENSITY LIOL-A Ex and LIOL-B Ex TECHNICAL SPECIFICATIONS 55 L810-LXS-A Exde average emission level ICAO ANNEX 14 low intensity type A Minimum Required Intensity L810-LXS-B Exde average emission level ICAO ANNEX 14 low intensity type B Minimum Required Intensity BEACON FRONT VIEW BEACON SIDE VIEW Vertical Angle FIXING DETAILS [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.