LOW INTENSITY OBSTRUCTION LIGHT CAP168 - GROUP A As specified by UK CAP168 "Licensing of Aerodromes" regulation, Low Intensity Obstruction Lights (LIOL) should be used to warn the presence of obstacles up to 45m height, such as telecommunication antennas, chimneys, cranes, buildings and other structures. Low Intensity Obstruction Lights are the simplest devices according to CAP168 standards and they have the following characteristics and uses: • LIOL Group A (intensity >10cd, red steady burning) have to be used to light obstacles on the aerodrome movement area or when LIOL Group B may cause dazzle; • LIOL Group B (intensity >200cd, red steady burning) have to be used have to be used on obstacles located away from the movement area or on the movement area with high levels of background illuminance. [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.

LOW INTENSITY LIOL Group A LOW INTENSITY OBSTRUCTION LIGHT Policarbonate UV resistant dome Stabilised light output: Group A: >10cd Standard circuits or TWIN* Infrared version* Based on LED technology Red steady burning light Anti-condensation Gore-Tex valve Anodised aluminium body with heat-sink pins Polyurethane foam GRP UV resistant box for electronic circuit TENTED PA *as option LUXSOLAR L810-LXS-CAP168 Low Intensity Obstruction Light is fully compliant to CAP168 (Low Intensity - Group A). With a low-weight and compact body, high quality and ultra-bright LEDs, optical reflector for an optimum...

liol group a technical specifications optical features options Based on LED technology RED light - Steady Burning LIOL Group A: >10 cd Horizontal beam radiation: 360° Vertical beam spread: from 0° to 30° Optical reflector mechanical features TWIN version: two separate LED circuits in the same fixture (normal + stand-by) Automatic changeover from normal to backup light Fault alarm IR Wavelength - 850nM, compatible with pilot's NVG LUXSOLAR Cloud Monitoring System - Low Impact • Anodised aluminium body with heat-sink pins for maximum heat dissipation • Policarbonate UV resistant dome • Polyurethane...

[email protected] - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.