LIOL-A, LIOL-B and LIOL-E LOW INTENSITY OBSTRUCTION LIGHT

Product catalog summary

Introduction
The document provides technical specifications and compliance details for LUXSOLAR's Low Intensity Obstruction Lights (LIOL), which are used to mark obstacles up to 45 meters high, such as towers and buildings, as per ICAO regulations.

Specifications

Types: LIOL-A (>10cd, steady red), LIOL-B (>32cd, steady red), LIOL-E (>32cd, flashing red).
Optical Features: LED technology, 360° horizontal beam, >10° vertical beam spread.
Mechanical Features: Anodised aluminium body, UV-resistant dome, IP66 protection, operating temperature -20°C to +50°C.
Electrical Features: Power supply AC/DC, consumption: LIOL-A 2W, LIOL-B 2.8W, LIOL-E 2W.

Compliance and Certification

Compliant with ICAO Annex 14, FAA, EASA, and ENAC standards.
Certified by DGAC/STAC, ENAC, and EASA.

Features and Options

Includes TWIN version with automatic changeover, fault alarm, and IR compatibility.
Optional cloud monitoring system for real-time status and diagnostics.

Applications
Suitable for airports, high buildings, chimneys, cranes, bridges, transmission lines, and more.

Technical Drawings
Includes diagrams showing emission levels and technical views of the product.

Catalog excerpts

LIOL-A, LIOL-B and LIOL-E LOW INTENSITY OBSTRUCTION LIGHT-1

LOW INTENSITY OBSTRUCTION LIGHT As specified by Annex 14 of ICAO regulation, Low Intensity Obstruction Lights (LIOL) should be used to warn the presence of obstacles up to 45m height, such as telecommunication towers, wind turbines, chimneys, cranes, buildings and other structures. Low Intensity Obstruction Lights are the simplest devices according to ICAO standards and they have the following characteristics and uses: • LIOL, Type A (intensity >10cd, red steady burning) can be used alone; • LIOL, Type B (intensity >32cd, red steady burning), can be used either alone or in combination with medium intensity obstacle lights Type B, Type AB or with high intensity obstacle lights Type AB; • LIOL, Type E (intensity >32cd, red flashing), can be used either alone or in combination with medium intensity obstacle lights, Type B. Flashing rate will be set at the same rate of other flashing beacons installed on the structure. [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.

Open the catalog to page 1

LIOL-A, LIOL-B and LIOL-E LOW INTENSITY OBSTRUCTION LIGHT-2

Policarbonate UV resistant dome ► Standard circuits or TWIN* ► Infrared version* Anti-condensation Gore-Tex valve Based on LED technology Red flashing light Red steady burning light Polyurethane foam GRP UV resistant box for electronic circuit LUXSOLAR L810-LXS Low Intensity Obstruction Light is compliant to ICAO (Low Intensity - Type A or B), FAA (Type L-810), ENAC and EASA certified. With a low-weight and compact body, high quality and ultra-bright LEDs, optical reflector for an optimum beam spread, LUXSOLAR LIOL-A/B product is your best choice for an efficient, long life and reliable Aircraft...

Open the catalog to page 2

LIOL-A, LIOL-B and LIOL-E LOW INTENSITY OBSTRUCTION LIGHT-3

OPTICAL FEATURES Radio and television tower Wind turbine Wind mast measurement Radar Antenna • RED light - Steady Burning • LIOL-E: >32 cd (flashing light) • Horizontal beam radiation: 360° • Vertical beam spread: >10° • Optical reflector • Anodised aluminium body with heat-sink pins for maximum heat dissipation • Policarbonate UV resistant dome • Polyurethane foam • Terminal JB for connection in Glass Reinforced Polyester (GRP), black colour • Degree of protection: IP66 • Operating temperature: -20°C to +50°C • Lamp unit weight: 1kg approx. • Anticondensation Goretex valve • SS304 beacon support...

Open the catalog to page 3

LIOL-A, LIOL-B and LIOL-E LOW INTENSITY OBSTRUCTION LIGHT-4

Vertical angle -L810-LXS-A average emission level -ICAO ANNEX 14 low intensity type A Minimum Required Intensity -L810-LXS-B/E average emission level -ICAO ANNEX 14 low intensity type B and E Min Required Intensity side VIEW [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - Combustion and Energy SRL Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.

Open the catalog to page 4