MEDIUM INTENSITY MEDIUM INTENSITY OBSTRUCTION LIGHT According to Annex 14 of ICAO regulation, Medium Intensity Obstruction Lights (MIOL) should be used to warn the presence of obstacles with an height between 45m and 150m, such as telecommunication towers, wind turbines, chimneys, cranes, buildings and other structures. Medium Intensity Obstruction Lights include three type of beacons, with different charactertistics and uses: • • • MIOL Type A (intensity 20.000cd, day-mode white flashing; 2.000cd, night-mode white flashing) should be used alone; MIOL Type B (intensity 2.000cd, night-mode red flashing) should be used either alone or in combination with Low Intensity Obstacle Lights, Type B or Type E; MIOL Type C (intensity 2.000cd, night-mode red steady burning) should be used either alone or in combination with Medium Intensity Obstacle Lights, Type AC. LUXSOLAR offers to its customers also DUAL type beacons in the same light fixture, suitable to be used during the day (with white LEDs) and during the night (with red LEDs); these beacons are: • • DUAL MIOL Type AB (intensity 20.000cd, day-mode white flashing; 2.000cd, night-mode red flashing) should be used in combination with Low Intensity Obstacle Lights, Type B or Type E; DUAL MIOL Type AC (intensity 20.000cd, day-mode white flashing; 2.000cd, night-mode red steady burning) should be used in combination with Medium Intensity Obstacle Lights, Type C. This catalogue is intended for commercial purposes only. For hazardous area equipments and components, the relevant standards, the relevant certificates and the relevant operating and maintenance instructions, must be followed. Changes or mistakes do not justify any claim for damage compensation.

MEDIUM INTENSITY MIOL-A Ex eb mb op is Patented heat dissipator for optimum cooling Based on LED technology White flashing light Stabilised light output: 20.000cd day mode 2.000cd night mode Optimized optical lens Standard circuits or TWIN* Borosilicate glass cover protection Anodised aluminium body Air-cooling system for +65% heat dissipation Anti-condensation Gore-Tex valve Ex eb terminal box approved “op is” as per IEC 60079-28 Optical Radiation note: electronic beacon driver in a separate enclosure LUXSOLAR L865-LXS Medium Intensity Obstruction Light is compliant to ICAO (Medium Intensity...

MEDIUM INTENSITY MIOL-A Ex eb mb op is TECHNICAL SPECIFICATIONS OPTICAL FEATURES • • • • • • • ELECTRICAL FEATURES Based on LED technology 20.000cd day mode, WHITE flashing 2.000cd night mode, WHITE flashing Horizontal beam radiation: 360° Vertical beam spread: 4° PMMA lens ATEX marking: - II 2GD Ex eb mb op is IIC T6 Gb; Ex op is tb IIIC T80°C Db - II 3GD Ex eb mb IIC T6 Gc; Ex tb IIIC T80°C Dc IECEx marking: - Ex eb mb op is IIC T6 Gb; Ex op is tb IIIC T80°C Db - Ex eb mb IIC T6 Gc; Ex tb IIIC T80° Dc Power supply by Luxsolar Control Panel: - 12/24 Vdc - 115/230 Vac Average power consumption...

MEDIUM INTENSITY MIOL-A Ex eb mb op is TECHNICAL SPECIFICATIONS 26.000 24.000 22.000 20.000 18.000 16.000 14.000 12.000 L865-LXS-200-Ex-A everage emission level at 90°C ambient temp. ICAO ANNEX 14 medium intensity type A Min. Required Intensity ICAO ANNEX 14 medium intensity type A Max. Required Intensity SINGLE VERSION TWIN VERSION This catalogue is intended for commercial purposes only. For hazardous area equipments and components, the relevant standards, the relevant certificates and the relevant operating and maintenance instructions, must be followed. Changes or mistakes do not justify any...