Vertical and horizontal Centrifugal Pumps
48Pages

Vertical and Horizontal Centrifugal Pumps Reliability – a Given with Lutz Series: B50, B6 B80 HME, B80 KME, B80 KGK TMB, AM, TMR

Lutz Centrifugal Pumps The product range at a glance

Lutz centrifugal pumps Here, everything revolves around safety and environmental protection: Lutz centrifugal pumps ensure the safe delivery of aggressive, corrosive and other hazardous acids or alkalis. Well thought-out modular system The individual component sizes, the technical constructions and materials of the vertical, wetwell immersion pump series can be combined as desired. Areas of application Centrifugal pumps are especially suited for use in electroplating and sewage engineering, in the chemical industry, in the field of water treatment and in gas purifying systems. For neutral...

Vertical Centrifugal Pumps Submersible Centrifugal Pump B50 Safety is our maxim For example, reliablility, safety and not the least important functionality are called for during the recirculation of chemicals and pickling baths. This submersible centrifugal pump was developed especially as a vertical, wet pump for the fast emptying of vessels and basins. Lutz placed considerable value thereby on low wear, large pumping capacity and short emptying times. Its low weight makes this pump especially user-friendly. High efficiency High pumping capacity Smooth running Low space requirement Fast...

Submersible Centrifugal Pump B50 High pumping capacity and low space requirements Materials (coming into contact with the pumped medium) B50 PP/HC Polypropylene (PP) PPO / PPE Carbon / SiC / HC FPM (EPDM) HC-4 (2.4610) Polypropylene (PP) PPO / PPE Carbon / SiC / HC FPM (EPDM) Stainless steel (1.4571) Pump tube: Stator: Mechanical seal: Secondary seal: Drive shaft: Utilisable Length (Length -110 mm) Practical pumping capacity The submersible pump built on the basis of the latest hydraulic knowledge and the proven single-tube principle can be used everywhere where vessels and basins must be...

Lutz Vertical Centrifugal Pumps Submersible Centrifugal Pump B6: The cost-effective solution for the plant construction industry If safety is your concern: Lutz B6 submersible centrifugal pump Some liquids are not only hazardous but must, on account of the building situation, be pumped through holes above the liquid level. Pipe ends in the side or the bottom of the container are not permissible for such media. Lutz B6 submersible centrifugal pumps made from PP or stainless steel solve this problem in an elegant way “from the top” – don’t worry, despite all these qualities they are...

Submersible Centrifugal Pump B6 No matter whether you are using stainless steel or PP: it is the same construction principle everywhere Thought-through design: A great little pump High performance, compact dimensions, low weight – everything fits with Lutz B6. The pump shaft is protected by an inner tube against any “attack” from the pumped medium. Small is best for the installed dimensions, and for this reason the liquid is pumped upwards between the inner and the outer tube.

Lutz Vertical Centrifugal Pumps Submersible Centrifugal Pump B6 in polypropylene (PP) and stainless steel (SS) Product detail Pump tube Category 1 / 2 (acc. to ATEX) Shaft seal Delivery rate* Delivery head* Viscosity** Temperature of medium Materials Pump tube up to m³/h up to m WS up to mPas max. °C Pump tube Impeller Immersion tube diameter max. mm Pressure joint Outer thread Weight (Pump tube 1000 mm + motor) kg Minimum necessary motor power for density 1 kg/dm3 [kW] Length 400-1000 mm*** Order No. (when ordering please quote) Supplementary length 100 mm (possible from 1100 - 3000 mm)...

Submersible Centrifugal Pump B6 No experiments Materials (coming into contact with the pumped medium): Utilisable Length (Length -120 mm) Stainless Steel (1.4571) ETFE FPM Ceramic, FPM, SS Stainless steel (1.4571) B6 PP Housing: PP Impeller: PP Seals: FPM Mechanical Seal: Ceramic, FPM, HC Drive shaft: HC-4 (2.4610) Suitable range of accessories see page 11-13.

Accessories Submersible Centrifugal Pump B50 Specification Lifting device To simplify the process of lifting the pump in and out of tanks or containers. Hose connection Hose plug with wing nut for connecting the hose to the pump tube or nozzle. Material PP Installation flange For fixing the drum pump to a companion flange. The flange is welded onto the pump tube. Other flange dimensions on request. DN 100, PN 10 Discharge flange Complete with seal. DN 40, PN 6 Reducing sleeve G 1 1/2 inner thread to G 1 1/4 outer thread for connecting a flow meter Reducing sleeve G 1 1/2 outer thread to G 1...

Accessories Submersible Centrifugal Pump B6 Specification Hose connection Hose connection with wing nut and seal for conecting the hoses to the the pump tube. For B6/PP Wing nut PP G 2 3/4 0303-200 O-ring PP 0118-380 Hose plug PP DN 25 0118-157 Hose plug PP DN 32 0118-158 Hose plug PP DN 38 0118-159 Hose plug PP DN 50 0118-160 Hose plug PP DN 63 0118-161 For B6/Niro Wing nut stainless steel G 2 1/4 Seal PTFE Hose plug stainless steel DN 25 Hose plug stainless steel DN 32 Hose plug stainless steel DN 38 Hose plug stainless steel DN 50 Installation flange For fixing the drum pump to a...

Accessories Submersible Centrifugal Pump B6 Product detail Connecting cable For extension of the connecting line for three-phase motors, 4-wired. According to requirements the cable is available in every necessary length. H07 RN-F, 4 x 1.5 mm2 Cekon-plug 5-pole, 16 A for three-phase motors Lifting device To simplify the process of lifting the pump in and out of drums. for three-phase motors Acid proof coating In aggressive atmosphere the three-phase motor should be protected by a special acid proof coating. If customer requires, a special varnish is possible. Acid proof coating Special...

Accessories Submersible Centrifugal Pump B6 Specification Motor protection switch Explosion proof according to EEx de IIC T6 with thermal and electromagnetic trip, protection class IP 66. A lifting device and two cable protective coverings are necessary for the mounting. Ex, 2.5 - 4.0 A Ex, 4.0 - 6.3 A Ex-plug CEE-round plug in accordance with EEx de IIC T6, splash proof in compliance with IP 65, 5-wired for three phase current. 5-pole, IP 65 5-pole, IP 65 CEAG STAHL Ex-plug CEE-socket in accordance with EEx de IIC T6, splash proof in compliance with IP 65, 5-wired for three phase current....