Vertical and Horizontal Centrifugal Pumps Reliability – a Given with Lutz Series: B50, B6 B80 HME, B80 KME, B80 KGK TMB, AM, TMR

Lutz Centrifugal Pumps The product range at a glance

Here, everything revolves around safety and environmental protection: Lutz centrifugal pumps ensure the safe delivery of aggressive, corrosive and other hazardous acids or alkalis. Well thought-out modular system The individual component sizes, the technical constructions and materials of the vertical, wet-well immersion pump series can be combined as desired. Centrifugal pumps are especially suited for use in electroplating and sewage engineering, in the chemical industry, in the field of water treatment and in gas purifying systems. amount of solid matter Materials: Polypropylene, polyvinylidenfluoride...

Product detail Safety is our maxim For example, reliability, safety and not the least important functionality are called for during the recirculation of chemicals and pickling baths. This submersible centrifugal pump was developed especially as a vertical, wet pump for the fast emptying of vessels and basins. Lutz placed considerable value thereby on low wear, large pumping capacity and short emptying times. Its low weight makes this pump especially user-friendly. y High efficiency S High pumping capacity S Smooth running S Low space requirement y Fast assembly S Simple starting y Easy maintenance...

Materials (coming into contact with the pumped medium)Pump_B50 PP/HC B50 PP/SS Pump tube: Polypropylene (PP) Polypropylene (PP) Mechanical seal: Carbon / SiC / HC Carbon / SiC / HC Secondary seal: FPM (EPDM) FPM (EPDM) Drive shaft: HC-4 (2.4610) Stainless steel (1.4571) The submersible pump built on the basis of the latest hydraulic knowledge and the proven single-tube principle can be used everywhere where vessels and basins must be emptied or filled quickly and safely. The pump is equipped with self-lubricating, wetted friction bearings.

Lutz Vertical Centrifugal Pumps Submersible Centrifugal Pump B6: The cost-effective solution for the plant construction industry If safety is your concern: Lutz B6 submersible centrifugal pump Some liquids are not only hazardous but must, on account of the building situation, be pumped through holes above the liquid level. Pipe ends in the side or the bottom of the container are not permissible for such media. Lutz B6 submersible centrifugal pumps made from PP or stainless steel solve this problem in an elegant way “from the top” – don’t worry, despite all these qualities they are absolutely...

Submersible Centrifugal Pump B6 No matter whether you are using stainless steel or PP: it is the same construction principle everywhere Thought-through design: A great little pump High performance, compact dimensions, low weight – everything fits with Lutz B6. The pump shaft is protected by an inner tube against any “attack” from the pumped medium. Small is best for the installed dimensions, and for this reason the liquid is pumped upwards between the inner and the outer tube.

determined with water at 20 °C determined with oil The lenght complies approx. to dimension C in the dimension table. The immersion depths specified in thetable are measured from lower surface of the pump foot to center discharge (dimension C in the dimensional drawing).When using an installation flange, the submersion depth is reduced. Choice of motors Type Three phase motor Output 1.5 up to 4.0 kW, 230/400 V, 50 Hz, approx. 2800 1/min., energy efficiency class IE 3 in accordance with EU regulations 640/2009 and 04/2014, protection class IP 54/IP 55.

Submersible Centrifugal Pump B6 Materials (coming into contact with the pumped medium): _B6 PP_B6SS_ Housing: PP Stainless Steel (1.4571) Mechanical Seal: Ceramic, FPM, HC Ceramic, FPM, SS Drive shaft: HC-4 (2.4610) Stainless steel (1.4571)

Accessories Submersible Centrifugal Pump B50 Product detail Lifting device To simplify the process of lifting the pump in and out of tanks or containers. Hose connection Hose plug with wing nut for connecting the hose to the pump tube or nozzle. Material PP Installation flange For fixing the drum pump to a companion flange. The flange is welded onto the pump tube. Other flange dimensions on request. DN 100, PN 10 Discharge flange Complete with seal. DN 40, PN 6 Reducing sleeve G 1 1/2 inner thread to G 1 1/4 outer thread for connecting a flow meter Reducing sleeve G 1 1/2 outer thread to G 1...

Order-No. Product detail Hose connection Hose connection with wing nut and seal for conecting the hoses to the the pump tube. Hose plug PP DN 25 Hose plug PP DN 32 Hose plug PP DN 38 Hose plug PP DN 50 Hose plug PP DN 63 For B6/Niro Wing nut stainless steel G 2 1/4 Seal PTFE Hose plug stainless steel DN 25 Hose plug stainless steel DN 32 Hose plug stainless steel DN 38 Hose plug stainless steel DN 50 Installation flange For fixing the drum pump to a companion flange. The flange is welded onto the pump tube. 0208-227 Foot strainer Available in PP and stainless steel. Hole diameter 5 mm and 12...

Connecting cable For extension of the connecting line for three-phase motors, 4-wired. According to requirements the cable is available in every necessary length. Acid proof coating In aggressive atmosphere the three-phase motor should be protected by a special acid proof coating. If customer requires, a special varnish is possible. Acid proof coating Special coating acc. to RAL

Lutz B80 Vertical Centrifugal Pumps Durable in service Construction benefits Special vapour seals Plain bearing or bearing-less versions available All parts coming into contact with the liquid are made of corrosion resistant plastics Abrasion resistant material combinations possible Wet-well or dry-well installation Immersion depths from 275 to 4000 mm, deeper immersion depths possible using tail pipe Motors from 0.75 kW as per energy efficiency class IE 3 in accordance with EU regulations 640/2009 and 04/2014 Perfection in plastic The B80 vertical centrifugal pumps are designed for use in closed,...