Flexible container emptying: For optimum transfer of thin-bodied, light or low viscous liquids Horizontal Container Pump Lutz B200 safety is our concern

Horizontal Container Pump Lutz B200 Different materials for a wide range of applications This very compact pump is an interesting alternative when conventional vertical drum pumps cannot be used e.g. for containers which are stored in shelves. In these cases an access from above is not possible, but the bottom drain of the IBC can be used. For this purpose the new horizontal Lutz B200 is directly connected to the bottom outlet valve. The hydraulic capacity is much higher compared to a hydrostatic outlet. In combination with delivery hose and nozzle, this pump allows a controlled filling and also...

Similar to the conventional Lutz drum and container pumps, the new pump tube can be combined with various universal and compressed air motors1. This results in different pump capacities. 1 Motors see main catalogue. ■ Thin-bodied mineral oil products ■ For highly aggressive alkalis and acids ■ Cleaning, care and disinfection agents

Horizontal Container Pump Lutz B200 *Use motors with low-voltage release, see main catalogue The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20°C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The flow rate achievable in use is lower and depends on the individual application, the media properties and the configuration of the pump. The max. delivery head is also dependent on the pump design, motor and medium. Viscosity determined with oil.

Horizontal Container Pump Lutz B200 The Lutz hand wheel connects motor and pump and allows a quick disconnection Pressure joint with thread The union nut enables a quick mounting at the outlet of the container The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20°C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The flow rate achievable in use is lower and depends on the individual application, the media properties and the configuration of the pump. The max. delivery...

Horizontal Container Pump Lutz B200 Pump tube B200 SS Technical data: Flow rate:1 Delivery head: Stainless steel 1.4571, ETFE, PTFE Carbon, ceramic, FPM or EPDM Typical liquids being pumped: B200 SS: corrosive and neutral liquids. B200 SS Pure: aqueous or fatty food products. B200 SS Pure (Ex): alcoholic, easy flammable food products. Several pump tubes are available for container pump Lutz B200 SS: Description: Pump tube B200 PURE SS 41-R-GLRD Pump tube B200 PURE SS 41-L-GLRD Pump tube B200 PURE SS 41-R-GLRD Pump tube B200 PURE SS 41-L-GLRD Pump tube B200 Ex PURE SS 41-R-GLRD* Pump tube B200...

Horizontal Container Pump Lutz B200 The Lutz hand wheel connects motor and pump and allows a quick disconnection Pressure joint with thread or clamp connection The union nut enables a quick mounting at the outlet of the container The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20°C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The flow rate achievable in use is lower and depends on the individual application, the media properties and the configuration of the pump....

Horizontal Container Pump Lutz B200

Horizontal Container Pump Lutz B200 9 Dynamic seals are subject to wear and can lead to leakage Dynamic seals should be replaced after specified operating times. Since the operating time of mobile pumps is less easy to monitor, there is a higher probability that wearing parts will be used longer than expected. The solution is the SafetyBox monitoring module with which leaks in the mechanical seal can be detected. ■ Simple installation, can be retrofitted at any time ■ Can also be used for other Lutz drumpumps ■ Detects leakage of conductive liquids ■ Visual and acoustic signals for leakage detection...

Our range of accessories Smooth and safe operation of the drum and container pumpsrequires a practical range of accessories. Whether for mobile use or permanently installed in a plant – with the Lutz accessories your pump becomes a perfect filling system. Our accessories comply with Regulation (EC) 1935/2004 and are marked with the "glass/fork symbol" for food safety. Discharge spout for direct filling and transferring into containers Nozzles for safe transferring of liquids Lifting device for safe lifting/lowering of the pump Connections Tri Clamp, milk pipe thread, aseptic, wine screw connection...

Lutz Pumpen is your reliable partner with a worldwide network of competent representatives for all service questions concerning our products. Customer-oriented action ranges from advice to sales and after-sales service. To be on the safe side, we offer not only high-quality products but also comprehensive services. Online guide Download Centre Spare parts Repair videos Do you have any questions about our products, do you need assistance with the selection for your project or are you looking for a contact person on site? Our experts will be happy to advise you:

Would you like to discover our complete portfolio? You can find our brochures here: Lutz Pumpen GmbH Erlenstraße 5-7 | D-97877 Wertheim | Phone +49 9342 879-0 | [email protected] | www.lutz-jesco.com/en