*mydirectindustry

Catalogs
LUMEL
catalogue Lumel

catalogue Lumel

Product catalog summary

Introduction
Lumel is a prominent provider of measuring instruments and electronics manufacturing services, focusing on quality management and customer satisfaction. The company complies with international standards such as ISO 9001:2008, ISO 14001:2004, and ISO/TS 16949:2009, and adheres to the 2002/95/EC Directive on hazardous substances.

Product Categories

Digital Meters: Used across various industries with features like programmable inputs, IP65 protection, and RS-485 digital output.
Measuring Transducers and Separators: Ensure accurate measurement and separation of electrical signals.
Meters and Analyzers of Power Networks: Provide detailed power network analysis.
Synchronizing Units: Facilitate synchronization in power systems.
Controllers: Include general and specific controllers for injection molds with alarm outputs and digital communication.
Power Controllers: Manage power distribution and control.
Recorders: Capture and log data for analysis.
I/O and Communication Modules: Enable data exchange in automated systems.
PLC and HMI Panels: Offer programmable logic control and human-machine interface.
Analog Meters and Shunts: Traditional measurement devices.
Displays and Clamp Meters: Visualize and measure electrical parameters.

Technical Specifications
Each product category includes detailed technical data, connection diagrams, and ordering codes to assist in selection and implementation.

Software and Additional Services
Lumel offers free software like LPCon for product configuration and services in plastic part production, electronic manufacturing, high-pressure die-casting, and CNC machining.

Conclusion
Lumel's catalog presents a wide array of products and services designed to meet various industry needs, backed by a commitment to quality and compliance with international standards.

Additional Functions

Memory for selected measured values: 9,000 samples
Memory of minimal and maximal values
Programmable current and voltage transformer ratios
2-points linear rescaling
Alarms indicated on the display
Internal memory: 750 samples
Memory for average power: 9,000 samples
Pulse output

Parameters

Various input and output configurations for different models
Support for resistance thermometers, thermocouples, voltage, and current measurements
Direct and indirect measurement capabilities using transformers

Connection Diagrams

Detailed electrical connection diagrams for various models
Illustrations for direct and indirect measurement setups

Ordering Codes

Specific codes for ordering different models and configurations
Options for input signals, output ranges, supply voltages, and acceptance tests
Custom-made versions available upon agreement with the manufacturer

Applications

Supply systems in industry and power industry
Heat engineering
Monitoring of power network parameters and quality
4-quadrant power and energy measurement
Measurement of THD and harmonics
Software for configuration of meters

Technical Features

RS-485 Modbus communication, Ethernet
Co-operation with current transformers and voltage transformers
Alarming based on selected parameters
Pulse output for energy retransmission

Overview
The document provides detailed technical specifications and functionalities of various power network meters, analyzers, and industrial process controllers, including power measurement, input/output configurations, interfaces, display options, supply voltage, protection ratings, and additional functions.

Power Measurement
Includes 3-phase power measurement, power factor, frequency, 15-minute active power measurements, 4-quadrant power and energy measurement, and energy tariffs.

Harmonics and Voltage
Addresses harmonics up to the 51st order, voltage dips and swells, and voltage asymmetry, with specifications for THD for both voltage and current.

Input/Output Specifications
Details various input configurations, including current and voltage inputs, and output options like relays, pulses, and analog outputs.

Interfaces and Display
Specifies interfaces such as RS-485 Modbus and Ethernet, with display options ranging from LED to TFT touch screens.

Supply and Protection
Supply voltage options and protection ratings are provided, depending on the device.

Additional Functions
Features include galvanic isolation, memory for power samples, programmable display quantities, energy quality measurement, and logging according to EN50160 standards.

Controllers
Describes industrial process controllers with programmable inputs, various output configurations, and control options like on/off and PID.

Ordering Codes
Detailed ordering codes for different models, specifying input current, voltage, version, language, and acceptance tests.

Application Examples
Examples include automatic synchronization of generators, measurement of network parameters, and temperature control in industrial settings.

Overview
The document provides technical specifications, ordering codes, and connection diagrams for various power controllers and recorders manufactured by LUMEL.

Power Controllers

GTS Supply Voltage: Options include 85-135 V a.c. and 195-253 V a.c.
RP7 Ordering Code: Specifies maximal current outputs with acceptance tests.
RP3 Ordering Code: Offers maximal current outputs with load voltage options and acceptance tests.
RPL1 Ordering Code: Includes control options and supply voltage options.

Recorders

Application Examples: Used for data presentation, logging, and control in various industries.
Features: Include data visualization on touchscreens and compatibility with FDA CFR21 standards.
Technical Data: Details on channels, inputs, outputs, interfaces, memory, and supply voltage.

Ordering Codes

N30B: Offers supply voltage options, additional outputs, and language preferences.
KD7 and KD8: Include options for measuring inputs, digital signals, interfaces, and memory configurations.
SM61 and PD22: Provide supply voltage options and input/output configurations.

Software

KD ARCHIVE: For reviewing and analyzing archive data on a PC.
KD7 SETUP: For configuring recorder settings via a PC.
KD CHECK: For verifying digital signatures in archive data.
KD CONNECT: For communication between the recorder and PC.

Connection Diagrams
Provides detailed diagrams for connecting voltage transformers and measuring power in various network configurations.

Analog Meters
Instructions for connecting power factor meters in single-phase and three-phase networks.

Ordering Codes
Detailed ordering instructions for D.C. and A.C. ammeters and voltmeters.

Power Meters
Includes tables for ordering power meters with specifications for measuring power in various network types.

Accessories and Specifications
Tables provide codes for meter dimensions, measuring ranges, and additional accessories.

Application Examples
Examples of display applications for visualizing process parameters and displaying text messages.

Technical Specifications
1. Display Types: Outdoor and indoor displays with various digit heights and color options.
2. Interfaces: RS-485 for value transmission and configuration.
3. Protection Rating: IP54 standard, with an IP65 option.
4. Additional Features: Brightness sensors and programmable color changes.

Ordering Codes
1. DN Series: Codes specify digit height, display color, and mounting options.
2. DL Series: Codes include display color and version.
3. DA1 Series: Options for text and graphical displays.

Electrical Connections
Detailed diagrams for connecting various display models.

Software and Configuration
1. LPCON Software: Free software for configuring Lumel products.
2. PD14 Programmer: For configuring non-RS-485 devices.

Clamp Meters NC10
1. Features: Current measurement up to 1000 A, temperature measurement, and backlit display.
2. Safety Standards: Complies with IEC 61010-1-2001 standards.

Production Services
1. Plastic Parts: Design and production of moulds and various finishing processes.
2. Electronic Manufacturing: SMD and THT assembly, PCB design, and testing services.
3. Die-Casting: High-pressure die-casting and CNC machining.

Company Overview
LUMEL S.A. is a leading European manufacturer specializing in electrical devices for automation and high-pressure aluminum castings, established in 1953.

Main Branches of Activity

Production of automatic devices for measurement and control.
Production and machining of high-pressure castings.
Design and manufacturing of control and measuring systems.
SMT assembly and production of plastic parts.

Industry Solutions
LUMEL S.A. provides solutions across various industries, including power, chemical, metallurgy, and more.

Certifications
The company operates under ISO 9001:2008, ISO 14001:2004, and ISO/TS 16949 standards.

Catalog excerpts

rs-485 OFFER of measuring instruments and Electronics Manufacturing Services

Open the catalog to page 1

- OF THE HIGHEST QUALITY OF PRODUCTION AND SERVICES To meet the expectation of our customers we continuously take care of improving the quality management system. It takes place at every activity level, from the iden- tification of the customer's needs, through the production process, to the research of the recipients satisfaction. To guarantee the highest quality we continuously supervise the production processes, we aim at the permanent parameter improving and we use the materials from the suppliers, who meet the highest global standards. We work in accordance with: - Technical specification...

Open the catalog to page 2

digital meters application: · · · · · power industry (substations, generators, turbines) heat engineering (heat and power plants, boiler plants) food industry (dairies, bakeries, food storage) pharmaceutical industry (drug storage) plastics processing industry wood industry (furnaces, drying plants) chemical industry pumping stations and sewage plants (visualization of flow, pressure and level in tanks) breweries, distilleries mimic panels selected features; · · programmable measuring inputs IP65 Protection rating frontal side wide supplying voltage range supplying output 3-colour display retransmission...

Open the catalog to page 4

Technical data Type Parameters supplying output (24 V/ 30 mA) for S and T versions (option) Galvanic isolation Display Supply voltage Protecion rating frontal/rear side red, green LED 3 digits (14 mm) 4 digits (10 mm) 24 V a.c., 110 V a.c., 230 V a.c., 85...253 V a.c./d.c., 20...40 V a.c./d.c. (option) Ambient temp. External dimensions Panel cut-out free LPCon software (using PD14 programmer) Additional functions pulse input (pulses, frequency, rotational speed, period, operating time counter, encoder) 1-phase power network parameters, programmable: 0...1/5A 0...100/400V a.c. 4 x relay (2 NO...

Open the catalog to page 5

Digital meters Technical data NA meters with bargraph indicators Type Parameters 1 x relay or 2 x OC (option) 1 x analog (option) 4 x relay or 8 x OC (option) 1 x analog (option) Interface Bargraph 1 x RS-485 MODBUS slave (option) 3 or 7-colour programmable horizontal Galvanic isolation Display Protection rating frontal/rear side Supply voltage Ambient temperature External dimensions Panel cut-out Additional functions free LPCon software (using RS-485) or using buttons • 2-point rescaling • arithmetical functions x2, √x, (+, -, *, / - only in NA6) • logging of the measured signal in programmed...

Open the catalog to page 6

rnNNcrrinN niorooinc Fig. 1. Electrical connections of N24S meters External transducer supply (option) Fig. 2. Electrical connections of N24Z and N24H meters for the measurement of voltage Fig. 5. Electrical connections of N24Z and N24H meters for the current measurement Fig. 3. Electrical connections of N24T meters External transducer Resistance Resistance Fig. 6. Electrical connections of N25S meters Fig. 7. Electrical connections of N25Z and N25H meters for the measurement of voltage External transducer supply (option) Fig. 10. Electrical connections of N25Z and N25H meters for the current...

Open the catalog to page 7

Fig. 17. Electrical connections of N30U meter Fig. 18. Connections of measuring input Additional output signals (option) Standard signals: in three wire system Fig. 19. Electrical connections of N30H meter Fig. 20. Electrical connection for the current measurement Fig. 21. Electrical connection for the voltage measurement Additional outputs signals (option) Fig. 23 Connections of the transducer with the OC output of NPN type Fig.24 Connections of the transducer with the OC output of PNP type Additional output signals (option) Fig. 25 Electrical connections of N30P meter Fig. 26 Electrical connections...

Open the catalog to page 8

Fig. 28 Electrical connections of NA3 meter Fig. 29 Electrical connections of NA5 meter Fig. 30 Connections of measuring inputs resistance thermometer resistance measurement current input resistance thermometer current input two-wire object transducer voltage input three-wire object transducer Fig. 31 Electrical connections of NA6 meter Fig. 32 Connections of measuring inputs resistance thermometer resistance measurement current input resistance thermometer current input voltage input two-wire object transducer three-wire object transducer

Open the catalog to page 9

digital meters ordering codes N24 AND N25 METERS TABLE 2. N25 ORDERING CODE: TABLE 1. N24 ORDERING CODE: N24 - Kind of input signal: standard: voltage, current temperature: thermocouples, resistance thermometers a.c. signals d.c. signals: high voltage/current Input signal: Supply voltage: 230 V a.c. 110 V a.c. 24 V a.c. 85...253 V a.c./d.c. with supply output 24 V/30 mA** 20...40 V a.c./d.c. with supply output 24 V/30 mA** Unit: see table 4 Version: standard non-standard settings custom-made* Language: Polish English other* Acceptance tests: without extra requirements with an extra quality inspection...

Open the catalog to page 10

ordering codes N20 AND N20Z METERS TABLE 10. N20 ORDERING CODE: N20 - X X XX XX X Input: Pt100: -50...400°C 1 Thermocouple J: -50...1200°C 2 Thermocouple K: -50...1370°C 3 0...20 mA 4 4...20 mA 5 ± 20 mA 6 0...60 mV 7 0...10 V 8 ± 10 V 9 Supply voltage: 85...253 V a.c./d.c. 1 20...40 V a.c./d.c 2 Unit: unit code acc. to the table 12 Version: standard custom-made* non-standard settings Acceptance tests: without extra requirements with an extra quality inspection certificate acc. to customer’s request* TABLE 11. N20Z ORDERING CODE: N20Z - Input: 100 V 1 250 V 2 400 V 3 1A 4 5A 5 frequency: 20...500...

Open the catalog to page 11

MEASURING TRANSDUCERS, SEPARATORS application: · · · · · · · · · · power engineering (substation telemechanics) power plants food industry storage of food, drugs, etc. mines automotive industry drying plants boiler plants, heat plants monitoring systems (SCADA) object data gathering selected features: · · · · signals standardization in automation systems galvanic isolation between input and output signal conversion with rescaling – linear (2-point) or multi-point programmability alarming (relay outputs) RS-485 Modbus communication, Ethernet measured values logging 15 minute power logging application...

Open the catalog to page 12