Cabinet Solutions LÜTZE LSC Wiring System

Reaching new heights in automation Contents: 1. General Information 2. Designs 2.1 LSC-BRACKET 2.2 LSC-COMPACT 2.3 LSC-DISTANCE and LSC-ALPHA 3. Mounting 3.1-3.3 Fastening in the control cabinet: LSC-BRACKET, LSC-COMPACT and LSC-DISTANCE 3.4 Compatibility 3.5 Mounting of the components on the frame 3.6 Mounting rails 3.7 Support rails 3.8 Brackets 3.9 Side supports 4. Wiring accessories: 4.1 Wiring combs and covers 5. Accessories 5.1-5.3 Mounting aids 6. EMC accessories 7. Technical information 7.1 Wiring information 7.2 LSC in the vibration and shock test 7.3 Proof of conductivity 7.4 Specification...

Installation Solutions LÜTZE has been developing and manufacturing electronic and electrical engineering solutions for controls and installations for more than 50 years. Cabinet Solutions Automation Solutions Our basic concept as system suppliers providing a comprehensive and well-match product range with which we can generate innovative and customised solutions has stood the test of time. The LSC system for cabinet wiring has been available since 1972. In the decades since then, numerous users have optimised their control cabinets in respect of space, time and cost. The close relationship between...

LSC system advantages Effective use of space The LSC wiring system allows considerable reduction in the size of control cabinets. This allows minimisation of the productive area and the costs involved. Accessible from the front Lütze’s ready-made LSC frames are installed instead of the mounting panel. Component fitting and wiring take place from the front. The frames are constructed in such a way that wiring running behind the rails can be accessed from the front at any time. Systematic flexibility The range of aluminium profiles allows adaptation to almost any control component. The modular...

LÜTZE-LSC - an ecological and economical hit LSC protects the environment Independent studies, e.g. that of the WHT Institute, have clearly shown the ecological strengths of the material of the LSC wiring system: In all the tests carried out, the LÜTZE aluminium system was able to deal far better with any environmental loads through out its lifespan than a control cabinet structure with a steel mounting panel. LSC - Quality which pays An economic comparison produces equally clear results. An LSC wiring frame increases system availability. This can make real savings. In addition, the reuse of...

2. Designs 2.1 LSC-BRACKET With the LSC-BRACKET system, the mounting rails are attached to the support rails using brackets. The rails are used to accept the control system components. The brackets help to provide additional space to accept the wiring plane and also offer optimum wiring, even in the case of re-wiring or rapid troubleshooting during servicing, and ensure a stable structure. The loose, vertical cable runs in the brackets, means that each wire can easily be traced. LSC-BRACKET: Most economic use of space in the control cabinet, mounting and wiring on two planes with front access...

• Optimum use of space for mediumsized and smaller control cabinets • Low construction height • Very light design with greatest stability LSC-COMPACT The smaller, lighter design of the Lütze wiring system is called LSC-COMPACT. Here too, the philosophy of economical use of space in a control housing applies. The space for the wiring plane is gained using side supports, which are screw tight to the mounting rails, the rails for the control components and the support rail. With the LSC-COMPACT too, wiring only takes place from the front. The frame can also be equipped and wired outside the control...

2. Designs 2.3 LSC-DISTANCE, LSC-ALPHA LSC-DISTANCE Make two into one: the advantages of the stable version of the rails for the LSC-ALPHA and LSC-BRACKET frames, combined with the lighter design from the LSC-COMPACT product range. As the space for the rear wiring compartment is created using 50 mm high supports, the LSCDISTANCE system does not require brackets. The system can be used in any cabinets/modular cabinets and, due to the fastening, in the rear cabinet position, has sufficient depth, for frequency converters. With the LSC-DISTANCE system, wires and cables are run on the rear side,...

3. Mounting 3.1 Fastening of the LSC-BRACKET frame in the control cabinet Installation of the LSC frame in the rearmost position with adapting brackets. Installation using adapting rails for different position planes. The aids shown are designed for the TS8 cabinet series. Installation aids for other cabinet manufacturers on request. For additional information, see Chapter 7.4 3.2 Fastening of the LSC-COMPACT frame in the control cabinet There are suitable installation kits for practically every housing available on the market. Installation situation, LSC-BRACKET frame Installation situation...

3. Mounting 3.3 Fastening of the LSC-DISTANCE frame in the control cabinet Installation situation in the TS8 cabinet (make Rittal) - fastening of the LSC-Distance frame on mounting brackets 3.4 Compatibility There are suitable installation kits for practically every housing available on the market. The LÜTZE LSC wiring system is compatible with the manufacturer-specific adaptations to all standard control cabinets. Of course, the specialist LÜTZE LSC team is available for consultation and support, should you have queries on installation.

3. Mounting 3.5 Mounting of the components on the frame With classic hat rail applications, the rail widths can be adjusted for the appropriate switching components. If components have to be mounted over multiple rails but without a locking foot in the area of the hat rails, then hat rail adapters and adapter rails can be of use here. The two articles make any form of mounting possible. The use of rails with glide nut grooves allow easy, lost cost housing of components in the cabinet. Fig. current rail system. RG rail with slots for free mounting without drilling.