8 - 17 Sales, Service & Distribution Center Newark, NJ 07105 Phone: 973-589-9150 Fax: 973-589-4432 Manufacturing, Sales, Service & Distribution Center Toledo, OH 43605 Phone: 419-691-2491 Fax: 419-693-3806 ISO-9001 Registered Quality System. ISO-21469 Compliant. Sales and Tech Service Support Phone: 1-800-733-4755 PRODUCT DATA LUBRIPLATE “SFGO ULTRA” SERIES ISO VISCOSITY GRADES 7, 15, 22, 32, 46 & 68 "These products are certified OUKosher Pareve ” *NSF International H-1 Registered "Theseproducts are Halal certified” NSFISO21469 Certification Typical Test Data - See Back SFGO Ultra 7 L0912-057 L0912-060 L0912-061 L0912-062 SFGO Ultra 22 L0931-057 L0931-060 L0931-061 L0931-062 SFGO Ultra 46 L0916-057 L0916-060 L0916-061 L0916-062 SFGO Ultra 15 L0930-057 L0930-060 L0930-061 L0930-062 SFGO Ultra 32 L0915-057 L0915-060 L0915-061 L0915-062 SFGO Ultra 68 L0917-057 L0917-060 L0917-061 L0917-062 The LUBRIPLATE SFGO Ultra Series of synthetic hydrocarbon food grade fluids have been formulated with 100% pure PAO synthetic base oils that meet a variety of demanding applications where operating higher temperatures are required. These Polyalphaolefin (PAO) based synthetics are outstanding lubricants for use under severe conditions subject to extremely high or low temperatures. They exhibit outstanding oxidation resistance and thermal stability capabilities. These fluids are all zinc-free. LUBRIPLATE strongly recommends the use of the LUBRIPLATE Oil Analysis Program to establish drain intervals in air compressor applications. Typical service life can be as much as 4,000 hours under normal operating conditions. Oil life can be affected by various contaminants, moisture and other factors. Therefore, oil analysis becomes critical when maximizing useful service life. Contact your authorized LUBRIPLATE Distributor for more information on the LUBRIPLATE Oil Analysis Program. APPLICATIONS The LUBRIPLATE SFGO Ultra Series may be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings, chains and airline lubricators. The LUBRIPLATE SFGO Ultra Lubricants are compatible with other LUBRIPLATE products such as LUBRIPLATE AC Oils, LUBRIPLATE HO Oils, LUBRIPLATE FMO Series and LUBRIPLATE FMO-AW Series. Always consult LUBRIPLATE before changing to an SFGO fluid from an existing lubricant that may not be compatible with Dolvalohaolefin based oils. ADVANTAGES o Excellent thermal stability resulting in longer service life. o Superior oxidation resistance. o Outstanding anti-wear properties providing extended equipment life. o Exceptional demulsibility characteristics. o Superb corrosion inhibitor package. o Naturally high viscosity index and low pour points which ensure optimum performance over a wide operating temperature range. o Superior cleanliness characteristics. o Excellent compatibility with a variety of elastomers, seals, plastics, paint and mineral oils. PACKAGING AVAILABLE Carton, 4/1 Gallon Plastic Jugs 5 Gallon Pail 16 Gallon Drum 55 Gallon Drum PACKAGING AVAILABLE Carton, 4/1 Gallon Plastic Jugs 5 Gallon Pail 16 Gallon Drum 55 Gallon Drum PACKAGING AVAILABLE Carton, 4/1 Gallon Plastic Jugs 5 Gallon Pail 16 Gallon Drum 55 Gallon Drum Note: LUBRIPLATE SFGO ULTRA 7 is also available in aerosol form and is listed as: LUBRIPLATE SFGO Ultra 7 Synthetic Chain & Penetrating Fluid Part No. L0912-063 - See Technical Data Bulletin 8-17B. *NSF International H-1 Registration No.’s (Meets former usda 1998 Guidelines) (Ultra 7) 125679 (Ultra 15)138420 (Ultra 22)138421 *Registered H-1 by NSF International for use in food processing facilities as a lubricant or anti-rust agent on equipment in which there may be incidental contact involving the lubricated part and the edible product. “The LUBRIPLATE SFGO Ultra Series contains no components derived from TSE/BSE relevant animal species; therefore, it is compliant with the requirements of the TSE Note for Guidance eMa/410/01 Rev. 3 July 2011”. Manufactured with ingredients that comply with FDA 21 CFR 178.3570 and FDA 21 CFR 172.882.

Slight variations in product color may occur due to storage temperature and exposure to light. Product color has no impact on the lubricant's performance or to the food safety rating of this NSF H1 and ISO21469 certified product.