LN, LP SERIES Corrosion Resistant Thermoplastic Pumps Pumping Solution

CORROSION RESISTANT THERMOPLASTIC PUMPS INTRODUCTION The Lubi LN and LP series of corrosion resistant thermoplastic pumps are designed for continuous medium pressure circulation or transfer of non-flammable liquids which are compatible with the pump component materials where no suction lift is required. A water seal flush port is provided for decontamination of chemicals on seal and seat elastomers. The pump discharge can be rotated 90° as per requirement. These pump will handle specific gravities to 1.1 (at 100 SSU or less). These pumps are available from 0.37 to 2.20 kW for single phase as...

CORROSION RESISTANT THERMOPLASTIC PUMPS Pump construction LN = Noryl pump series LP = Polypropylene pump series C = Close-coupled pump L = Long-coupled pump = No code for standard motor F = Flame proof motor* Type range Motor type * Flame proof motor is available only with Long-coupled pump construction SECTIONAL DRAWING & MATERIALS Volute 1/4" NPT Water plug “O” ring for water plug Hex bolt with nut Flat washer 1/4" Impeller “O” ring for volute fitting Adaptor Shim washer Mechanical shaft seal “O” ring for mechanical shaft seal Water thrower Bracket Base plate Pump shaft Hex bolt MATERIAL LN...

CORROSION RESISTANT THERMOPLASTIC PUMPS PERFORMANCE CURVES (BASED ON WATER, SG = 1.00) 0 l/min l/sec

CORROSION RESISTANT THERMOPLASTIC PUMPS DIMENSIONS & WEIGHT - CLOSE COUPLED PUMP A PUMP TYPE DIMENSIONS & WEIGHT - LONG COUPLED PUMP WITH STANDARD MOTOR L B PUMP TYPE

CORROSION RESISTANT THERMOPLASTIC PUMPS DIMENSIONS & WEIGHT - LONG COUPLED PUMP WITH FLAME PROOF MOTOR L PUMP TYPE LUBI INDUSTRIES LLP Near Kalyan Mills, Naroda Road, Ahmedabad-380 025, INDIA. Phone : +91 - 79 - 61700100, Fax No. :+91 - 79 - 61700399. Sales Enquiries: [email protected], [email protected] www.lubipumps.com Product Improvement is a continuous process at ‘LUBI’. The data given in this publication is therefore subject to revision. 01.00.011216.0057 Customer Care