Heavy Duty Sewage Pumps (2.0 HP to 60.0 HP) 50Hz.

Product catalog summary

Overview: The document provides detailed specifications and performance data for LHP Heavy Duty Sewage Pumps, ranging from 2.0 HP to 60.0 HP. These pumps are designed for handling sewage and wastewater in various applications, including water treatment plants, leather factories, and public buildings.

Performance Range: The pumps offer a flow rate of up to 24,000 liters per minute (1440 m³/hr) and a dynamic head of up to 38 meters.

Applications: These pumps are suitable for sewage management, drainage of wastewater from tanks in water treatment plants, and pumping sewage from residential, commercial, and industrial buildings.

Features:

International standard design with VCT cable, thermal overload protector, and silicon carbide mechanical seal.
Multiple impeller designs (P, E, U types) to handle solids and fibrous substances.
Epoxy resin seal cable base to prevent water intrusion.
Automatic reset motor protector to prevent motor damage.

Specifications:

Available in 60Hz with special features on request.
Superior abrasion-resistant mechanical seal.
Guide Rail System for easy installation and maintenance.

Impeller Types:

P Type: Single channel non-clog impeller for large solids.
E Type: Includes an oil seal ring for extra protection against silt and sand.
U Type: Semi-vortex impeller for handling long fibrous materials.

Performance Data: The document includes detailed performance charts at different RPMs (2900, 1450, and 910) for various models, indicating power, flow rate, and head.

Dimensions and Weight: The document provides dimensions and weight for different models, highlighting solid passage capability and net/gross weight.

Catalog excerpts

Heavy Duty Sewage Pumps (2.0 HP to 60.0 HP) 50Hz.-1

Heavy Duty Sewage Pumps (2.0 HP to 60.0 HP) Performance Range Flow rate up to 24,000 l/min. (1440 m3/hr) ^ Drainage of waste water from the liberation tank, purifying tank and sewage tank in water treatment plant. Drainage of waste water containing fibrous additives from leather factory, dyeing factory and food processing factory. Sewage management, accumulated water, septic tank, stock farm. Pumping sewage from single and multi family dwellings. Pumping sewage from hotels, restaurants, schools International standard design : VCT cable, thermal overload protector, silicon carbide mechanical seal, high grade cast iron, good P / E Multiple impeller designs to handle solids laden sewage and/or fibrous substance. For Extra protection, an oil seal ring has been installed under the oil chamber. This lip seal helps prevent the ingress of silt and sand into the lower seal chamber. outlet pipe Superior abrasion resistant mechanical seal manufactured with silicon carbide to ensure the best seal effect. Full range offering low to high head and flow capabilities, with compact and easy installation. Also available with Guide Rail System, which allows automatic remote connection and disconnection without entering the pit. Oil lip seal mounted outside of seal chamber stops solids gathering around seal faces. Thermal overload protector «t Equipped with Automatic reset motor protector, prevents motor from burning due to high temperature/phase failure/voltage drop and lock impeller. Casing cover Cable base Epoxy resin seal cable base to prevent water intrusion into motor through prevent clogging. ^ Single channel non-clog impeller, allows large solids passage preventing clogging and allowing higher head applications with solids laden media. ^ Vortex impellers create a hydraulic passage, allowing long fibrous materials to pass through without any contact with the impeller. Pump of U type impeller (3 Phase) operating in a higher current when L reverse, please adjust into fit directions Special Features on request

Open the catalog to page 1