Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. LUBI INDUSTRIES LLP
  3. Corrosion Proof Submersible Drainage Pumps 50Hz.
video corpo

Corrosion Proof Submersible Drainage Pumps 50Hz.

Corrosion Proof Submersible Drainage Pumps 50Hz.
1 / 1 PageView full catalog

Corrosion Proof Submersible Drainage Pumps 50Hz.

Product catalog summary
Overview: The document provides technical specifications and features of the MSP series submersible drainage pumps, including models MSP521, MSP521T, MSP551, and MSP551T. These pumps are designed for efficient drainage with options for wide angle and vertical float switches.
Specifications:
  • Motor: Oil-filled, thermally protected, 230V, 50Hz, 1Phase, 2850 RPM.
  • Models: MSP521 and MSP551 with 1/4 HP and 1/2 HP respectively.
  • Construction: Corrosion-resistant composite with stainless steel shaft and fasteners.
  • Discharge Pipe Size: 1-1/2 inches.
  • Optional: Sic/sic mechanical shaft seal for sandy water.
Performance:
  • Performance curves indicate flow rates up to 22,000 LPH for MSP551 and 12,000 LPH for MSP521.
  • Minimum sump pit diameters: 13" for MSP521, 15" for MSP521T, 17" for MSP551, and 17" for MSP551T.
  • Maximum solid passage size: 9.5" for MSP551 models and 10.5" for MSP521 models.
Features:
  • Energy-efficient motor with permanent lubrication and extra-long 15 feet grounded power cord.
  • Available with automatic submersible models.
  • Includes a 1-1/2" flexible hose connection and clamp.
Dimensions & Weight:
  • Net weight ranges from 7.0 kg to 9.0 kg.
  • Volume: 0.022 to 0.028 cubic meters.
See more

Catalog excerpts

Corrosion Proof Submersible Drainage Pumps 50Hz.-1

Submersible Drainage Pump Submersible drainage pump with Vertical float switch Submersible drainage pump with Wide angle float switch ♦ Corrosion resistant composite construction. ♦ 230V thermally protected energy efficient motor. Oil filled motor for better heat dissapation. ♦ Permanently lubricated ball bearings. ♦ Extra long 15 Feet grounded power cord. ♦ 1-1/2" Discharge pipe size. ♦ Stainless steel shaft ♦ Stainless steel fasteners. ♦ Provide with 1-1/2" flexible hose connection and clamp ♦ Available with sic/sic mechanical shaft seal for pumping sandy water (Optional). Performance Curve Model Designation Minimum sump pit diameter Performance Table Motor Specifications Oil Filled ; Thermally Protected Note : The above shown performance is nominal performance and may vary from pump to pump.

 Open the catalog to page 1

All LUBI INDUSTRIES LLP catalogs and technical brochures

  1. SMSJ SERIES
    SMSJ SERIES

    2  Pages

  2. LHL SERIES
    LHL SERIES

    4  Pages

  3. LN, LP SERIES
    LN, LP SERIES

    6  Pages

  4. Lubi Industries Llp
    Lubi Industries Llp

    16  Pages

  5. LHM & LVM SERIES
    LHM & LVM SERIES

    64  Pages

  6. LBS SERIES
    LBS SERIES

    4  Pages

  7. MH, MHI & MHN SERIES
    MH, MHI & MHN SERIES

    4  Pages

  8. LSK, LSM, LSB, LSF & LSD SERIES
    LSK, LSM, LSB, LSF & LSD SERIES

    16  Pages

  9. LSV SERIES
    LSV SERIES

    2  Pages

  10. 8" cast iron submersible pump
    8" cast iron submersible pump

    12  Pages

  11. 10" Cast Iron Submersible Pump
    10" Cast Iron Submersible Pump

    12  Pages

  12. 6" Cast Iron Submersible Pump
    6" Cast Iron Submersible Pump

    78  Pages

  13. 10 inch Cast Iron Submersible Pump 50 HZ
    10 inch Cast Iron Submersible Pump 50 HZ

    12  Pages

  14. 8" Cast Iron Submersible Pump 50 HZ
    8" Cast Iron Submersible Pump 50 HZ

    38  Pages

  15. 3" Noryl submersible pump
    3" Noryl submersible pump

    3  Pages

  16. Pressure Booster System.
    Pressure Booster System.

    2  Pages

  17. Pressure Booster Pumps.
    Pressure Booster Pumps.

    4  Pages

  18. Booster sets with 2 to 4 LCR pumps.
    Booster sets with 2 to 4 LCR pumps.

    28  Pages

  19. Vertical Multistage Pumps 50 Hz.
    Vertical Multistage Pumps 50 Hz.

    80  Pages

  20. Three Phase Induction Motors(0.25 to 60.0 HP).
    Three Phase Induction Motors(0.25 to 60.0 HP).

    36  Pages

  21. Single Phase Induction Motors (0.25 to 3.0 HP).
    Single Phase Induction Motors (0.25 to 3.0 HP).

    2  Pages

  22. Single-stage bare shaft end-suction pumps 50Hz.
    Single-stage bare shaft end-suction pumps 50Hz.

    100  Pages

  23. Sewage Pumps (1.0 HP to 3.0 HP) 50Hz.
    Sewage Pumps (1.0 HP to 3.0 HP) 50Hz.

    2  Pages

  24. Large Volume Water pumps (3.0, 7.5, 10.0 & 15.0 HP) 50Hz.
    Large Volume Water pumps (3.0, 7.5, 10.0 & 15.0 HP) 50Hz.

    2  Pages

  25. Drainage Pumps (1.0 HP to 3.0 HP) 50Hz.
    Drainage Pumps (1.0 HP to 3.0 HP) 50Hz.

    2  Pages

  26. Construction Drainage Pumps(1.5 HP to 10.0 HP) 50Hz.
    Construction Drainage Pumps(1.5 HP to 10.0 HP) 50Hz.

    4  Pages

  27. Self - Priming Mud Pumps (1.0 to 5.0 HP).
    Self - Priming Mud Pumps (1.0 to 5.0 HP).

    16  Pages

  28. Grinder Pumps(1.2 HP to 5.0 HP) 50Hz.
    Grinder Pumps(1.2 HP to 5.0 HP) 50Hz.

    2  Pages

  29. Heavy Duty Sewage Pumps (2.0 HP to 60.0 HP) 50Hz.
    Heavy Duty Sewage Pumps (2.0 HP to 60.0 HP) 50Hz.

    4  Pages

  30. Cast Iron Submersible Drainage Pumps 50Hz.
    Cast Iron Submersible Drainage Pumps 50Hz.

    1  Page

  31. Close-Coupled Vertical in-line Pumps 50Hz.
    Close-Coupled Vertical in-line Pumps 50Hz.

    128  Pages

  32. Centifugal Pumps (2.0 to 30.0 HP).
    Centifugal Pumps (2.0 to 30.0 HP).

    8  Pages

  33. Single-stage end-suction pumps 50Hz.
    Single-stage end-suction pumps 50Hz.

    176  Pages

  34. Centrifugal Pumps (2.0 to 10.0 HP).
    Centrifugal Pumps (2.0 to 10.0 HP).

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.