RSMAG • Specific for sanitary applications • SS304 sensor pipe • ± 0.2% ; ± 0.5% accuracy • DIN and CLAMP sanitary connection • PFA lining • Power supply 85 * 265 Vac o 12; 24 Vac/Vdc • Datalogger via pendrive USB • Configuration and displaying via VL701with O-LED display RSmag flowmeters are suitable for applications in food and pharmaceutical industries. DIN11851 or Clamp ISO 2852 process connections are suitable for applications with milk, beer or other drinks. Manufactured completely in stainless steel, it is widely used in sanitary applications. TECHNICAL FEATURES Flow rate range RSmag is able to process signals from fluids with flow rates of up to 10m / s in both directions (bidirectional meter). Range dimension / lining material DN25 - DN150/PFA Sensor pipe material SS304 Housing material epoxy painted aluminum Electrodes material SS316L - Hastelloy C - Titanium - Tantalum Measure range 0,6m3/h - 600m3/h Accuracy ±0,5% standard; ±0,2% opt Repeatability ±0,1% Fluid conductivity >5pS/cm Power supply 85-265Vac, 24Vdc, 12Vdc. Consumption 6W, max. 8W. Temperature range Remote version operating temperature: -40 - +150°C Compact version operating temperature: -40 - +100°C Storage temperature: -40-85°C Communication MODBUS RTU (opt) or Hart (PENDING) Data Logger Internal data logger to USB pen drive for flow measurements and analog inputs storing; the measurement storage interval can be set from 15 to 3600 seconds Output 4-20mA: 0-500D Frequency output: 0,1-10000 Hz Pulse output: 24Vdc galvanically isolated or open collector galvanically isolated 24V 20mA (opt) Alarm output: 2 relays, 3A 230Vac N.O. Input signals RSmag has 2 active analog inputs at 24Vdc for 2-wire transmitters connection (eg. Temperature or pressure) and 1 digital input for an external contact connection for the integrated batch function restart and for partial totalizer management. Reverse Flow Allows measure and totalization of reverse flow Output Testing Relays output: Transmitter can switch relays at testing value. Current Source: Transmitter can be commanded to supply a specifi ed test current between 4.0 and 20.0 mA. Frequency Source: Transmitter can be commanded to supply a specifi ed test frequency between 1 and 10000 Hz. Low Flow Cutoff Adjustable. Below selected value, instantaneous flow and outputs are driven to the zero fi ow rate signal level Humidity Limits 0-100% RH to 150 °F (65 °C), not condensing. Damping Adjustable between 1 and 99 seconds Compact version IP rating IP67 Remote version IP rating sensor IP67 / IP68 (by request) - converter IP67 Anti-condensation filter Anti-condensation fi lter installed on converter LTH Electronics Ltd, Chaul End Lane, Luton, Bedfordshire. LU4 8EZ England Telephone: +44 (0)1582 593693 Fax: +44 (0)1582 598036 email: [email protected] web: www.lth.co.uk