Flow measurement for conductive and chemically aggressive liquids Dn from 10 to 2000 mm Measurement accuracy: ± 0.2%; ± 0.5% Neoprene / PTFE coatings Power supply 85-265vAC; 12vDC; 24vDC lv AC Datalogger on USB pendrive Removable O-LED display module Remote control via Smartphone RPmag flowmeter is suitable for all of applications into “industrial process”. Various materials for lining are available as well as electrodes made of tantalum, hastelloy c, titanium. Most common communication systems such as Modbus, Hart and by means of an app for Android smartphone via Bluetooth. RPMAG has an integrated data logger for the recording of the measurements over time. It consist in an USB pen drive which is inserted behind the removable O-LED display VL701. The recorded data are stored into a TXT file which is compatible with Excel or other equivalent analisys software packages Flow rate range RPmag is able to process signals from fluids with flow rates of up to 10m/sin both directions (bidirectional meter). Range dimension / lining material PTFE DN10-DN500 / RUBBER DN65-DN2000 Sensor pipe material SS321 Housing material epoxy painted aluminium Electrodes material SS316L - Hastelloy C - Titanium - Tantalum - Platinum Measure range <0.1m3/h * >110000m3/h Accuracy ±0.5% standard; ±0.2% optional Repeatability ±0.1% Fluid conductivity >5pS/cm. Power supply 85-265vAC, 24vAC/DC, 12vDC. Consumption 6W, max. 8W. Ambient Temperature Limits Remote version operating temperature: RUBBER -10 to +80°C; PTFE -40 to +150°C Compact version operating temperature: RUBBER -10 to +80°C; PTFE-40*to100oC Storagetemperature: -40 to 85°C Communication protocol Modbus; Bluetooth App Android (opt.); Hart (opt.) Data Logger Internal data loggerto USB pen drive for flow measurements and analog inputs storing; the measurement storage interval can be set from 15 to 3600 seconds galvanically isolated or open collector galvanically isolated 24v 20mA (opt) Alarm output: 2 relays, 3A 230vAC N.O. Input signals RPmag has 2 active analog inputs at 24vDC for 2-wire transmitters connection (eg. Temperature or pressure) and 1 digital input for an external contact connection for the integrated batch function restart and for partial totalizer management. Reverse Flow Allows measure and totalization of reverse flow. Output Testing Relays output: Transmitter can switch relays at testing value. Current Source: Transmitter can be commanded to supply a specified test current between 4.0 and 20.0 mA. Frequency Source: Transmitter can be commanded to supply a specified test frequency between 1 and 10000 Hz. Low Flow Cutoff Adjustable. Below selected value, instantaneous flow and outputs are driven to the zero flow rate signal level. Humidity Limits 0-100% RH to 150 °F (65 °C), not condensing. Damping Adjustable between 1 and 99 seconds. Compact version IP rating IP67 Remote version IP rating sensor IP67 / IP68 (by request) - converter IP67 Anti-condensation filter Anti-condensation filter installed on converter

ELECTROMAGNETIC FLOW RPMAG Electromagnetic flowmeter For conductive fluids. With sensor pipe in SS321 Medium ambient temperature range: -20° to +75°C IP67 electronic housing with anti-condensation filter 2 alarm relays (min/max) LTH Electronics Ltd, Chaul End Lane, Luton, Bedfordshire. LU4 8EZ England Telephone: +44 (0)1582 593693 Fax: +44 (0)1582 598036 email: [email protected] web:

Electrodes material Power supply LTH Electronics Ltd, Chaul End Lane, Luton, Bedfordshire. LU4 8EZ England Telephone: +44 (0)1582 593693 Fax: +44 (0)1582 598036 email: [email protected] web: www.lth.co.uk

ELECTROMAGNETIC FLOW REMOTE VERSION 4. Converter, wall mounting