PTU Series Ultrasonic Level Transducers • Level / Distance transducer up to 15 Metres • 1" BSP fitting or DN100 Flanged PP Housing • IP68 Enclosure • 24v DC Power supply • Suitable for use with granular solids, liquids & sludge The PTU Series of ultrasonic level transducers have been designed for use in tanks, silos & channels & are suitable for use with granular solids, liquids & sludge. The IP68 Polypropylene enclosure makes the PTU transducers suitable for use in aggressive chemicals or liquids & with granular solids. By using the PTU series of transducers with the Swing control unit configuration & calibration is performed on the Swing controller. The PTU series of Ultrasonic level transducers are supplied complete with a 3 Metre connection cable & a red & yellow LED for indicating correct operation of the transducers. By using a combination of PTU transducers & the Swing control unit it is possible to measure & control level, differential level, open channel flow measurement & control up to 5

Specification Enclosure material: Mechanical installation: Mechanical protection: Electrical connection: Working temperature: Pressure: Power supply: Power consumption: Maximum measuring range: Blocking distance: 0.3m to 0.7m depending on model Temperature compensation: PT100 from -20 to + 75 °C 1mm Via the Swing control unit Yellow LED flashing for echo receiving / Red LED for supply Note that the PTU transducers have a blocking distance of between 0.3 to 0.7 Metres depending on the model type. Where the transducers will not measure. Install the transducer perpendicular to the surface...