PG13.5pH and Redox Electrodes • Double junction reference • Euro standard PG13.5 cap style • Fast response full range pH glass formula • Detachable cables The P11, P14, O11, O14 and GT135 electrodes are 12mm diameter electrodes with the European standard PG13.5 configuration. The 12mm x 120mm size fits a wide array of housings found in both industrial and waste water treatment applications. This standard design simplifies electrode stocking, as one sensor can now serve as a replacement for numerous installations. The detachable lead arrangement on the top of the sensor enables simple maintenance and saves the cost of a replacement cable. Available also as Redox (ORP) sensors which utilise a large surface area 99.99% pure platinum band for a fast stable response. The P14 and O14 electrodes have an Epoxy body while the PII and O11 electrodes have a glass body. The GT135 pH electrodes have minimum drift due to a special reference-pH glass design and come with a built in PT1000 temperature compensator. Connection cables are available in standard lengths of 1,5 and 10 metres. LTH Electronics can supply a wide range of electrode holders to suit the range of PG13.5 pH and Redox electrodes on offer. Please contact our sales department for details.

Specification P14 pH electrode pH range 0-14pH E0 point -25 to +25mv Temperature range 0-100°C Response time: < 30 seconds for 95% FSD Reference AgCl, gel filled single junction Junction type Porous Teflon Body Epoxy Shaft length 120mm Stem diameter 11.8-12.2mm O14 Redox electrode Range 0-1000mv Temperature range 0-80°C Reference AgCl, single junction Junction type Teflon Body Epoxy Shaft length 120mm Stem diameter P11 pH electrode pH range 0-14pH E0 point -25 to +25mv Temperature range 0-100°C Response time: < 30 seconds for 95% FSD Reference AgCl, liquid filled single junction Junction type Annular...

LTH Electronics Ltd, Chaul End Lane, Luton, Bedfordshire. LU4 8EZ England Telephone: +44 (0)1582 593693 Fax: +44 (0)1582 598036 email: [email protected] web: www.lth.co.uk Electronics www.lth.co.uk PG 13.5 pH & Redox Sensors for use with PME20 & WPA series holders. These products comply with current European Directives LTH Electronics Ltd reserves the right to make changes to this data sheet or the product without notice, as part of our policy of continued developments and improvements. All care has been taken to ensure the accuracy of information contained in this data sheet. However we cannot...