ECS40Series PEEK™ Electrodeless Conductivity Sensors • Low Maintenance. • Steam Sterilisable to 135°C, Thermal Shock Resistant. • Hygienic, Inline, Dip and Tank Mounting Options. • IP67 Connection Simplifies Installation and Maintenance. • Ideal for Brewing, Dairy, Food and Process Applications. • Fast Temperature Response t90 < 10 secs • Conductivity and Solution Concentration Measurements. The Electrodeless method of measuring conductivity has many advantages over conventional methods. In particular the sensors will operate with virtually zero maintenance and provide reliable measurements over extended time periods. The ECS40 sensors can be mounted inline, in a tank wall, large bore pipe or in an open tank using a variety of fittings. The option of several different hygienic flanges caters for the majority of applications. The sensor is manufactured in PEEK™ a food grade material with excellent chemical resistance and high temperature performance. The construction of the sensor allows it to operate at 100°C continuously, withstand thermal shocks commonly associated with CIP applications and the sensor can be steam sterilised up to 135°C. The sensors are fitted with Pt1000 temperature sensors and are compatible with all LTH Electrodeless conductivity instruments. The temperature sensor is mounted in direct contact with the medium via a stainless steel jacket with an alternative PEEK jacket available for applications where stainless steel might be unacceptable. Connection is made via an IP67 plug which simplifies installation and maintenance.

ECS/43T ECS/45T NETTED MATERIALS PEEK (SENSOR BODY) 316 ST/BTL CT/C HOUSING 8 SCREWED TEE)

Specification Hygienic Flanges Suffix T Temperature sensor: Standard Sizes RJT: 2”, 2.5”, 3” Tri clamp: 2”, 3” IDF/ISS: 2”, 2.5”, 3” DIN 1185: 50mm, 80mm Common Specification Class A Pt1000 RTD Temperature Thermal shock: Response T90 LTH Electronics www.lth.co.uk Maximum continuous, 100°C, subject to material compatibility with solution. Short term 30 mins 135°C. 10°C per second. Less than 10s - stainless steel temperature pocket. Less then 2.5 mins - PEEK temperature pocket. Notes: Flanges for the ECS49 sensors must be ordered seperately. Minimum pipe size for insertion sensors 2.5”, 63.5mm....

Electronics www.lth.co.uk Order Codes ECS40 Series Electrodeless Conductivity Sensor Connection Cables ^ ^ These products comply with current European Directives / \ Hw. LTH Electronics Ltd reserves the right to make changes to this data sheet or the product without notice, as part of our policy of continued y J developments and improvements. All care has been taken to ensure the accuracy of information contained in this data sheet. y However we cannot accept responsibility for any errors or damages resulting from errors or inaccuracies of information contained herein. Issue: 0314 Certificate...