CMC7 AND CMC8 SERIES Low Cost Insertion Conductivity Cells Features • Competitively priced • Integral connection cable • In line mounting The CMC7 and CMC8 series of insertion conductivity cells are suitable for use in pure water measurement applications where cost and size are important factors. The principle advantage of this type of construction is that the cell constant is not affected by sample volume or the proximity of any pipework. The conductivity cells can be supplied with traceable certification. The CMC7 conductivity cell is moulded in epoxy resin with three impregnated graphite electrodes and is fitted with 6 metres of connection cable. The CMC8/001/PT43 conductivity cell is injection moulded in Polypropylene and uses two stainless steel coaxial electrodes and has a cell constant of K=0.0135. The cell is supplied complete with an integral 2 metre or 10 metre connection cable and features built in PT1000 temperature compensation. This cell is suitable for use on low pressure, low temperature pure water applications.

conductivity cells are injection moulded in Polypropylene with 2 impregnated carbon electrodes and are supplied complete with either a 2 metre or 10 metre integral connection cable. conductivity cells are non-temperature constant is affected by sample volume. protruding electrodes. cell constant of K=1.0, flush electrodes and is suitable for conductivity readings The cells require no initial or periodic calibration and the only maintenance required is to keep the electrode surfaces clean. CONNECTING CABLE EPOXY RESIN NITRILE WASHER

NETTED PARTS■ NETTED MATERIALS

Specification CMC7/10 Conductivity cell Maximum operating temperature 90°C Maximum operating temperature: 50°C Maximum operating temperature: 50°C Maximum operating pressure 100psi Maximum operating pressure: 3.3 bar / 50 psi Maximum operating pressure: 3.3 bar / 50 psi Wetted materials Epoxy Resin & Impregnated Graphite Wetted materials: Polypropylene, 316 Stainless Steel Wetted materials: Polypropylene, Impregnated Graphite Cable length Standard 6 metres Cable length: 2 or 10 metres Cable length: 2 or 10 metres Cell constant accuracy ±2% Cell constant accuracy: ±3% Body colour: Blue Temperature...

LTH Electronics Ltd, Chaul End Lane, Luton, Bedfordshire. LU4 8EZ England Telephone: +44 (0)1582 593693 Fax: +44 (0)1582 598036 email: [email protected] web: www.lth.co.uk www.lth.co.uk Order Codes Type No K=1.0, 0.75" BSP, no temperature compensation with 6 metres of connection cable. K=1.0, 0.75" BSP, with PT1000 temperature compensation and 6 metres of connection cable K=10.0, 0.75" BSP, no temperature compensation with 6 metres of connection cable. K=10.0, 0.75" BSP, with PT1000 temperature compensation and 6 metres of connection cable. K=0.0135, 0.5" BSP with stainless steel electrodes, PT1000...