Overview High-efficiency Tangential Fans
8Pages

Tangential Axial Radial LTG High-Efficiency Fans The extensive program Focus on knowledge Even airflow over large areas Temperature range -40°C to +800°C (-40°F to +1500°F) LTG High-Efficiency Tangential Fans LTG Engineering Services

2 In many production processes, the work area must be exposed to a uniform flow of air or gas over the entire width. The flow-through principle In a tangential fan, the air is drawn in over the entire length of the fan impeller. Inside the impeller the airflow is diverted and accelerated by the vortex created by the rotation of the impeller. The airstream then exits over the entire length of the impeller on the discharge side. The vortex separates the intake and discharge side of the fan at the narrowest point between the impeller and the vortex builder. Together with the fan scroll the...

LTG’s Engineering Services department has a perfect background to answer your questions in a reliable and detailed manner: œ More than 80 years experience of component and plant design in the field of process air and building technology. œ Comprehensive, expert, knowledge regarding A/C and ventilation technology and systems. œ State-of-the-art research and development centre including several room flow labs, a reverberation chamber, and a calorimetric test station. œ A complete dust lab with equipment for pre- and fine filtration and several separation and compacting units. œ Software tools...

4 The extensive product range Optimum cooling, heating, drying Impeller diameter 25 mm to 1000 mm (1.0 to 40 in) Temperatures -40 to +800°C (-40 to +1500°F) Series TAh 60 Tangential fan with direct drive motor and heating element. High corrosion resistance. Impeller diameter: 60 mm (2.4 in) Air/gas temp.: -40 to +70 °C (-40 to +160°F) Sizes: 145 to 615 mm (5.8 to 24.6 in) Airflow: up to 700 m3/h (410 cfm) Stat. pressure: up to 100 Pa (0.4 in H20) Heating capacity: up to 4.5 kW Series TA 25/40, GA 25/40 Tangential fan with direct drive motor. High corrosion resistance. Impeller diameter:...

5 The extensive product range Optimum cooling, heating, drying Impeller diameter 25 mm to 1000 mm (1.0 to 40 in) Temperatures -40 to +800°C (-40 to +1500°F) Series GA 90 Tangential fan with direct drive motor. High corrosion resistance. 180° straight through airflow. Impeller diameter: 90 mm (3.5 in) Air/gas temp.: -40 to +70 °C (-40 to +160°F) Sizes: 397 to 1 227 mm (16 to 48 in) Airflow: up to 1600 m3/h (950 cfm) Stat. pressure: up to 45 Pa (0.18 in H20) Series TM 125/150/200, TMt 125/150/200 Tangential fan with direct drive motor. Impeller diameter: 125/150/200 mm (5/6/8 in) Air/gas...

6 LTG Engineering Services Process Air Technology Successful cooperation with clients from many industries Power modules for amplifiers as they are used in mobile communication systems, must be cooled evenly for trouble- free operation and long life. To avoid heat accumulation, the emitted heat must be removed from the enclosure. Tangential fans series TA 25, 40, 60, allow for a low height of the enclosure and keep the noise levels to a minimum. Plastic bottles Printed/varnished parts such as plastic bottles have to be dried and cooled off before further processing. For a consistently good...

7 LTG Engineering Services Process Air Technology Successful cooperation with clients from many industries Steel parts After forging, the red-hot steel parts are annealed with ambient air. To achieve the required hardness and therefore material strength it isessential that air is blown evenly on all parts and that certain annealing curves are adhered to. Tangential fans series VQ meet these criteria. They produce an absolutely even airflow over the entire work area. Plastic bumpers Parts, such as plastic bumpers, are tested in a test cabinet where they are subjected to certain temperature...

450-29-pdf (0507) Printed on chlorine-free bleached paper. Subject to technical alterations. © LTG Aktiengesellschaft, Stuttgart LTG Aktiengesellschaft Grenzstraße 7 · D-70435 Stuttgart Postfach 40 05 25 · D-70405 Stuttgart y +49 (711) 82 01-180 Fax +49 (711) 82 01-696 Internet: www.LTG-AG.de E-Mail: prozessluft@LTG-AG.de LTG S. r. l. con socio unico Via G. Leopardi, 10 · I-20066 Melzo y (02) 9 55 05 35 · Fax (02) 9 55 08 28 Internet: www.LTG-SRL.com E-Mail: ltg@ltgsrl.191.it LTG Incorporated 105 Corporate Drive, Suite E Spartanburg, SC 29303 y (8 64) 5 99-63 40 · Fax -63 44 Internet:...