Summary metal optics
12Pages

{{requestButtons}}

Catalog excerpts

Summary metal optics - 2

We are proud to make contributions to some of the big scientific developments of the new millennium. We develop components for experiments with a diameter of 26.695 meters on an energy level of 50 TeV on a distance of 14 billion light years ... or just a few nanometers Projects and products for our customers in industry and science benefit from our experience.

Open the catalog to page 2
Summary metal optics - 3

Technical data: Typical dimensions 50 mm x 50 mm or 500 mm x 500 mm 50 mm up to 500 mm dia. Surface figure Approx. 0.1 pm overlOO mm* Surface roughness Ra approx. 1 nm - 5 nm* Optionally coatings available. Other specifications available on special order. Custom dimensions available on special order. *Vary with the material Involved and its structural rigidity. sophisticated diamond-cutting technologies is available, for single piece as well as for series production. Materials ™ Oxygen-free copper (OFHC-CU) ™ Aluminum ™ Aluminum alloys (6082 and 6061 preferred) ™ Brass ™ Plastics (usually...

Open the catalog to page 3
Summary metal optics - 4

sophisticated diamond-cutting technologies is available, for single piece as well as for series production. Technical data: Radii ranges from approx. 5 mm to infinite (concave or convex surfaces) Typical dimensions 50 mm x 50 mm or 500 mm x 500 mm 50 mm up to 500 mm dia. Surface figure Approx. 0.1 Jim over 100 mm* Surface roughness Ra approx. 1 - 5 nm* Other specifications available on special order. Optionally coatings available. *Vary with the material involved and its structural rigidity. Materials ™ Oxygen-free copper (OFHC-CU) ™ Aluminum ™ Aluminum alloys (6082 and 6061 preferred) ™...

Open the catalog to page 4
Summary metal optics - 5

sophisticated diamond-cutting technologies is available, for single piece as well as for series production. Technical data: Typical dimensions on-axis 0 50 mm up to 0 500 mm Surface figure Approx. 0.5 p,m over 100 mm* Surface roughness Ra approx. 2 -15 nm* Optionally coatings available. Other specifications available on special order. Custom dimensions available on special order. *Vary with the material involved and its structural rigidity. Materials ™ Oxygen-free copper (OFHC-CU) ™ Aluminum ™ Aluminum alloys (6082 and 6061 preferred) ™ Brass ™ Plastics (usually PMMA) ™ Crystalline...

Open the catalog to page 5
Summary metal optics - 6

Raster-scanning polygons We manufacture polygons having arbitrary pyramidal angles. We can also machine varying pyramidal angles on individual polygons. Widths across flats Approx. 10 mm to 500 mm Surface figure Approx. X./10 in the visible spectral region Machining tolerances* Indexing error, approx. 5 arcsec Pyramidal error, approx. 5 arcsec Surface roughness Ra approx. 1 - 5 nm* Optionally coatings available. Other specifications available on special order. Custom dimensions available on special order. *Vary with the material involved and its structural rigidity. Materials ™ Oxygen-free...

Open the catalog to page 6
Summary metal optics - 7

■ Materials “ Oxygen-free copper (OFHC-CU) ™ Aluminum ™ Aluminum alloys (6082 and 6061 preferred) “ Brass ™ Plastics (usually PMMA) ™ Crystalline materials ™ All nonferrous metals NEW! Optical surfaces out of steel without polishing. Ultrasonic assisted diamondturning on steel parts. Other special shapes are available on special order. We look forward to receiving your inquiry. Figuring accuracy and surface roughness varies with: - reflective-surface dimensions - the types of surface figures specified - the materials employed

Open the catalog to page 7
Summary metal optics - 8

Axes stroke X 900 mm / Y 350 mm / Z 200 mm Surface figure and roughness depending on design and dimension Materials ™ Oxygen-free copper (OFHC-CU) ™ Aluminum ™ Aluminum alloys (6082 and 6061 preferred) ™ Brass ™ Plastics (usually PMMA) ™ Crystalline materials ™ All nonferrous metals Micro milling

Open the catalog to page 8
Summary metal optics - 9

With the dynamic-axis technology even non-rotationsymmetric geometries are possible sophisticated diamond-cutting technologies is available, for single piece as well as for series production. Materials ™ Oxygen-free copper (OFHC-CU) ™ Aluminum ™ Aluminum alloys (6082 and 6061 preferred) ™ Brass ™ Plastics (usually PMMA) ™ Crystalline materials ™ All nonferrous metals

Open the catalog to page 9
Summary metal optics - 10

Different types: ™ Microlenses ™ Grids ™ Fresnel- optics Manufacturing technologies: ™ Diamond-turning ™ Diamond- milling ™ Diamond- planing ™ Structure size down to submicron area Materials ™ Oxygen-free copper (OFHC-CU) ™ Aluminum ™ Aluminum alloys (6082 and 6061 preferred) ™ Brass ™ Plastics (usually PMMA) ™ Crystalline materials ™ All nonferrous metals

Open the catalog to page 10
Summary metal optics - 11

* These coatings may be optimized for a specified wavelength range.

Open the catalog to page 11
Summary metal optics - 12

HIT ULTRA OUR PROFESSION IS PRECISION Aftholderberg, Wiesenstrafie 9 Germany-88634 Herdwangen-Schonach Tel. +49 (0) 7552 / 40599-0 Fax+49 (0) 7552/40599-50 eMail: info@lt-ultra.com www.lt-ultra.com METAL OPTICS OVERVIEW FLAT MIRRORS SPHERICAL MIRRORS ASPHERICAL MIRRORS POLYGON MIRRORS & SCANNERS SPECIAL OPTICS UP-MILLING PARTS STRUCTURED OPTICS

Open the catalog to page 12

All LT Ultra-Precision Technology GmbH catalogs and technical brochures

  1. CUSTOMized

    4 Pages

  2. MTC 650

    2 Pages

  3. MTC 400

    2 Pages

  4. MTC 350

    2 Pages

  5. MMC 5000

    2 Pages

  6. MMC 600-900

    2 Pages

  7. MMC 900H

    2 Pages

  8. MMC 600H

    2 Pages

  9. MTC 250

    2 Pages