TLP-xxx/2(S)

Product catalog summary

Overview: The document provides technical specifications and installation guidelines for the TLP-xxx/2(S) AC Surge Protective Device (SPD), designed for low voltage power systems. It is a Class III, Type 3 SPD suitable for DIN rail installation, offering both visual and remote status indication.

Specifications:

Nominal and Maximum Voltage: The device supports nominal AC voltages of 30V, 60V, 150V, and 255V, with corresponding maximum continuous operating AC voltages.
Discharge Current: Nominal discharge current is rated at 1 kA to 3 kA, with total discharge current ranging from 2 kA to 5 kA.
Voltage Protection Levels: Protection levels vary, with [1-2] configurations offering up to 1250V and [1/2-PE] configurations up to 1500V.
Response Time: The response time is ≤ 25 ns for [1-2] and ≤ 100 ns for [1/2-PE].
Temporary Overvoltage (TOV): The device can handle TOVs of 335V for 5 seconds and 1200V + UREF for 200 ms.

Installation and Design:

Design: The SPD features a monobloc design with a compact form factor, suitable for mounting on 35 mm DIN rails according to EN 60715.
Material and Protection: Made from thermoplastic (UL 94 V-0), it is designed for indoor installation with an IP20 protection rating.
Operating Temperature: The device operates within a temperature range of -40°C to +80°C.

Additional Features:

Remote Contacts: The TLP-xxx/2S variant includes optional remote signalling contacts.
Energy Coordination: It is compatible with other arresters in the LSP product family, featuring a reliable thermal disconnect device.
Packaging: Standard order quantity is 96 units, with packaging dimensions of 260 x 220 x 330 mm.

Connection and Configuration:

Wiring: Supports in-line and parallel wiring configurations.
Internal Configuration: Includes TN-S, TN-C, and TT (single-phase) connection diagrams.

Catalog excerpts

AC Surge Protective Device • Monobloc design and DIN rail installation • Visual and remote status indication • High discharge capacity due to heavy-duty zinc oxide varistor / GDT combination • Reliable thermal disconnect device • Energy coordination with other arresters of LSP product family DIN rail, compact Type 3 / Class III SPD with MOV & GDT and narrow design for protecting industrial electronics system and equipment at boundaries from LPZ 1-3 and higher. Technical Data SPD according to IEC 61643-11 / EN 61643-11 Nominal a.c. voltage (Un) Max. continuous operating a.c. voltage (Uc) Max. continuous operating d.c. voltage (Uc) Nominal load current a.c. (Il) Nominal discharge current (8/20 ps) (In) Total discharge current (8/20 ps) [1+2-PE] (Itotal) Combination wave (Uoc ) Combination wave [1+2-PE] (Uoc total) Voltage protection level [1-2] (Up) Voltage protection level [1/2-PE] (Up) Max. mains-side overcurrent protection Short-circuit withstand capability for mains-side overcurrent protection with 25 A gL/gG (ISCCR) Temporary overvoltage (TOV) [1-2] Ut Temporary overvoltage (TOV) [1/2-PE] (I ) Ut Temporary overvoltage (TOV) [1+2-PE] (II) Ut Operating temperature range (Tu) Operating state / fault indication Number of ports Cross-sectional area (min.) For mounting on Enclosure material Place of installation Degree of protection Capacity Approvals Remote contact (RC) a.c. switching capacity d.c. switching capacity Cross-sectional area for remote signalling terminals Order Information TLP-xxx/2S (with remote contacts) 0103022 0.5 mm2 Solid / Flexible 4 mm2 Solid / 2.5 mm2 Flexible 35 mm DIN Rails acc. to EN 60715 Thermoplastic, UL. 94 V-0 Indoori nstallation IP_20 77 Low Voltage Power Systems Series

Open the catalog to page 1