DC Surge Protective Ddevice SLP30-DC65/2(S) Class II ● Type 2 Location of Use: String box, Inverter Mode of Protection: (DC+/-) - PE, (DC-/+) - PE Surge Ratings: In = 15 kA (8/20 µs) ITotal = 30 kA (8/20 µs) IEC/EN Category: Class II / Type 2 Protective Elements: High Energy MOV Housing: Pluggable Design Compliance: IEC/EN 61643-41 Nominal Discharge Current (8/20 µs) Total Discharge Current (8/20 µs) Maximum Discharge Current (8/20 µs) Response Time Rated Operational DC Voltage Maximum Continuous Operating DC Voltage (DC+) - PE, (DC-) - PE Voltage Protection Level (DC+) - PE, (DC-) - PE Mechanical & Environmental Operating Temperature Range Permissible Operating Humidity Atmospheric pressure and altitude Terminal Screw Torque Conductor Cross Section (max) 39.9 Ibf·in [4.5 Nm] 2 AWG (Solid, Stranded) / 4 AWG (Flexible) 35 mm2 (Solid, Stranded) / 25 mm2 (Flexible) Mounting Degree Of Protection Housing Material Thermal Protection Operating State / Fault Indication Remote Contacts (RC) RC Switching Capacity RC Conductor Cross Section (max) 35 mm DIN Rail, EN 60715 IP 20 (built-in) Thermoplastic: Extinguishing Degree UL 94V-0 Yes Green ok / Red defect Optional AC: 250 V / 0.5 A; DC: 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A 16 AWG (Solid) / 1.5 mm2 (Solid) Order Information Ordering Code SLP30-DCxxx/2S (With remote contacts) 87 Low Voltage Power Syste

Internal Configuration Legend /PE PE/G Conductor Terminal S Signalling Contacts Optional DIN 43880 Dimension Packaging Dimensions (H x W x L) Standard Order Quantity Single Unit SLP30-DCxxx/0 DIN 43880 Dimension Packaging Dimensions (H x W x L) Standard Order Quantity Connection Diagram Pluggable Single & Multi-pole SPDs