PV Surge Protective Device FLP-PVxxxG-(S) Class I • Class II • Type 1 • Type 2 Location of Use: String box, Inverter Mode of Protection: (DC+) - PE, (DC-) - PE, (DC+) - (DC-) Surge Ratings: ITotal = 12.5 kA (10/350 µs) ITotal = 40 kA (8/20 µs) IEC/EN Category: Class I+II / Type 1+2 Protective Elements: High Energy MOV and GDT Housing: Monoblock Design Compliance: IEC 61643-31:2018 EN 61643-31:2019 Technical Data FLP-PVxxxG-(S) IEC Electrical Maximum Continuous Operating DC Voltage Nominal Discharge Current (8/20 µs) Impulse Discharge Current (10/350 µs) Total Discharge Current (10/350 µs) Total Discharge Current (8/20 µs) Maximum Discharge Current (8/20 µs) Voltage Protection Level Response Time Short-Circuit Current Rating Mechanical & Environmental Operating Temperature Range Permissible Operating Humidity Atmospheric pressure and altitude Terminal Screw Torque Conductor Cross Section (max) 39.9 Ibf·in [4.5 Nm] 2 AWG (Solid, Stranded) / 4 AWG (Flexible) 35 mm2 (Solid, Stranded) / 25 mm2 (Flexible) Degree Of Protection Housing Material IP 20 (built-in) Thermoplastic: Extinguishing Degree UL 94V-0 Thermal Protection Operating State / Fault Indication Remote Contacts (RC) RC Switching Capacity RC Conductor Cross Section (max) Optional AC: 250 V / 0.5 A; DC: 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A 16 AWG (Solid) / 1.5 mm2 (Solid) Order Information Ordering Code FLP-PVxxxG-(S) (with remote contacts)

Internal Configuration Legend ©/PE PE/G Conductor Terminal S Signalling Contacts Optional Complete Unit Standard Order Quantity 16 Units