PV Surge Protective Device Location of Use: Mode of Protection: Surge Ratings: IEC/EN Category: Protective Elements: Class I+II / Type 1+2 High Energy MOV Pluggable Design IEC 61643-31:2018 EN 61643-31:2019 Technical Data Maximum Continuous Operating DC Voltage Nominal Discharge Current (8/20 ps) Impulse Discharge Current (10/350 ps) Total Discharge Current (10/350 ps) Total Discharge Current (8/20 ps) Maximum Discharge Current (8/20 ps) Voltage Protection Level Residual Current at Uc Response Time Short-Circuit Current Rating Number of Ports Mechanical & Environmental Operating Temperature Range Ta -40 °F to + 158 °F [-40 °C to + 70 °C] Permissible Operating Humidity RH 5%...95% Atmospheric pressure and altitude 80k Pa ... 106k Pa / -500 m ... 2000 m Terminal Screw Torque Mmax 39.9 Ibf-in [4.5 Nm] Conductor Cross Section (max) 2 AWG (Solid, Stranded) / 4 AWG (Flexible) Degree Of Protection Housing Material Thermal Protection 35 mm2 (Solid, Stranded) / 25 mm2 (Flexible) 35 mm DIN Rail, EN 60715 IP 20 (built-in) Thermoplastic: Extinguishing Degree UL 94V-0 Yes Operating State / Fault Indication Remote Contacts (RC) RC Switching Capacity RC Conductor Cross Section (max) Order Information Ordering Code FLP-PVxxx FLP-PVxxx-(S) (with remote contacts) FLP-PVxxx/0 (spare modules) Green ok / Red defect Optional Low Voltage Power Systems Series

Internal Configuration Legend /PE PE/G Conductor Terminal S Signalling Contacts Optional Complete Unit FLP-PVxxx-(S) DIN 43880 Dimension Packaging Dimensions (H x W x L) Standard Order Quantity Spare Plug Single Unit FLP-PVxxx/0 DIN 43880 Dimension Packaging Dimensions (H x W x L) Standard Order Quantity Pluggable Multi-pole SPDs