An Elegant Solution to MicroDosing

MeterMizer *Reduces lubricant cost. *Reduces cleanup cost in the work area. *Reduces cleanup cost of nished parts. *Cools, cleans and extends the life of all abrasive wheels. *Automatic, frees operator from lubrication interruptions. *Dispense lubricant in an airless metered drop upon command *Dispense lubricant into a stream of air with pulsating action. *Lubricant is dispensed on a programmable count of the machine cycles. *Lubricate bearings at multiple locations on a prearranged time cycle. *Operate using a solenoid valve controlled by an electrical switch or a PLC. *Lubricates, cools and...

Applications The MeterMizers unique design allows it to be used in many dierent applications. Precise and controlled dispensing of uids in a new low pressure spray. Here are a few of the applications for the MeterMizer, use your imagination for others. Drilling, Milling and Tapping Applications Drilling Milling and Tapping Applications need not only lubrication, they not only lubrication, but they also require cooling and chip removal. The MeterMizer injects lubricant or coolant into the air stream either on a repetative time cycle, programmed schedule or manual command. After the lubricant is...

Here’s How It Works! The MeterMizer consists of miniature Lubricant Ejectors, Oscillating Timer, Reservoir, On/Off Valve, Manifold and remote Nozzles with Coaxial Tubing. Lubricant Ejectors, are stacked to the underside of the Manifold. The Reservoir is inserted into the top of the Manifold and shop air enters the On/Off Valve at the side of the Manifold. A Bleeder Valve under the bottom Ejector is opened and Lubricant enters the Manifold and moves on to the Ejectors where it lls the Lubricant Chambers in each Ejector. The Bleeder Valve is closed. When the On/Off Valve opens shop air enters the...

activates the Lubricant Ejectors by pushing a Piston forward, displacing a preset volume of lubricant past a Check Valve and into the inner tube of the Coaxial Tubing. The lubricant moves to the Nozzle tip in measured volumes. When the inner tube is full, on the next pulse, it ejects one measured drop of lubricant into the air stream being expelled out of the outer tube of the Coaxial Tubing. The Air and lubricant are carried to the work area. In between pulses the MeterMizers piston returns to the rest position. The check valve is closed preventing lubricant from returning to the Piston Chamber...

MeterMizer-XL Systems using the MeterMizer-SA inserted in Security Enclosures • • • Available with Oscillating Timers or Solenoid Valves. Includes: Manifold, Ejectors, Reservoir, Manual On/Off Valve and Nozzle with Magnetic Base and 10’ Coaxial Tubing for each Ejector. (Magnets to hold the box in place are ordered separately.) MM-2060-XL Includes all of the above and one Ejector. MM-2061-XL Includes all of the above and two Ejectors. MM-2062-XL Includes all of the above and three Ejectors. MM-206X-XL MeterMizer -XL w/MeterMizer-SA Systems and Oscillating Timer Every ejector on every MeterMizer...

MeterMizer-XL Systems using the MeterMizer-BG inserted in Security Enclosures • • • Available with Oscillating Timers or Solenoid Valves. Includes: Manifold, Ejectors, Manual On/Off Valve and Nozzle with Magnetic Base and 10’ Coaxial Tubing for each Ejector. (Magnets to hold the box in place are ordered separately.) MM-2070-XL Includes all of the above and three Ejectors. MM-2072-XL Includes all of the above and two Ejectors. MM-207X MeterMizer -XL w/MeterMizer-BG Systems and Oscillating Timer Every ejector on every MeterMizer unit includes a twelve inch FlexTube on a Magnetic Base, standard...

MeterMizer-SA Systems Stand Alone System with Reservoir MM-200X MeterMizer-SA Series Includes an Oscillating Timer, Manifold, Magnetic Base, Ejectors, 19 oz. Reservoir, Manual ON/Off Valve, Nozzle, Magnet and 10’ Coaxial Tubing. MM-2001 Includes all of the above plus One Ejector MM-2002 Includes all of the above plus Two Ejectors MM-2003 Includes all of the above plus Three Ejectors Every ejector on every MeterMizer unit includes a twelve inch FlexTube on a Magnetic Base, standard nozzle assembly and 10 feet of coaxial tubing. MM-2011 Includes all of the above plus one Ejector MM-2012 Includes...

MeterMizer-SA Systems Stand Alone System without Reservoir MM-202X MeterMizers - SA with Oscillating Timer Less Reservoir Includes: Manifold, Magnetic Base, Ejectors, Manual ON/Off Valve, Nozzle, Magnet, and 10’ Coaxial Tubing. Applications requiring larger volumes of lubricant will be better served with a larger Reservoir. These resevoirs are usually remote form the MeterMizer and attached with ve feet of plastic tubing. Reference Page 13 for Resrevoir information. MM-2021 Includes all of the above and one Ejector MM-2022 Includes all of the above and Two Ejectors MM-2023 Includes all of the...

The MeterMizer-SC for single cycles is designed to deliver lubricant and air together in quick short actuations upon command. A single Solenoid Valve is used to dispense air from the Nozzle Tip and actuate the Ejector at the same time to dispense a predetermined amount of lubricant into the air stream As soon as the Solenoid Valve is shut off the air will stop the system is ready for its next cycle. This system is perfect for stamping, assembly, chain lubrication and other applications. MM-204X MeterMizer-SC Series with Reservoir Includes: a Solenoid Valve, Manifold, Magnetic Base, Ejectors,...

MeterMizer-BG Systems The MeterMizer-BG is designed to handle additional Ejectors for the larger jobs where more nozzles are needed to complete the application. Large Reservoirs for the larger applications. Install REMOTE from the MeterMizer. Comes with 5 feet of tubing to connect between Reservoir and MeterMizer. Smaller Reservoirs, for the applications where Ejectors are not actuated as frequently, such as tapping or chain lubrication, attach DIRECTLY to the MeterMizer. MM-205X MeterMizer - BG Four Ejectors or More Includes: One Oscillating Timer, Manual On/Off Valve, One Nozzle, FlexTube,...