B-Coater
5Pages

Take the guesswork out of lubricating blanks! Computer controlled for just the right amount of lubricant. Eliminates spray bottles, brushes and rollers. Ensures that every blank will be lubricated. Increases the speed of production. Improves die life, less down time. Reduces rejects. Saves money.

Available in Six Popular Sizes! Computer controlled, the B-Coater will dispense most viscosity lubricants in the quantity needed. When a blank is moved into the rolls, it will be grabbed and automatically moved through the rolls while being lubricated. The B-Coater is capable of handling up to .375 gauge material. After the blanks go through the B-Coater, they are they are deposited on the out conveyor on the exit side of the B-Coater and ready to go into the press. Top Frame w/Roll is hinged to bottom frame allowing the upper roll to float as the blank enters the rolls. Hinged top Frame...

Basic B-Coater Components B-Coater Rolls The B-Coater includes a Stainless Steel Housing, LSP Electronic Controller, DC Motor and Variable Speed Controller, Reservoir and Pump. Rolls are ordered separately. Three types of rolls cover a wide range of applications. Takes only minutes to change rolls, so rolls with different finishes can be switched when film thickness requirements change. Basic B-Coater with BC-400 Controller Lubricant Line from the reservoir to the top and bottom rolls. Cable from the Controller to the Solenoid. The Solenoid will open when it receives a signal from the...

Heavy Duty Conveyor Tables B-Coater Dimensions The LSP conveyor table is an easy way to feed blanks through the B-Coater. Two tables are positioned, one on each side of the B-Coater. The B-Coater is mounted at the proper height so that the blank is rolled from the inlet conveyor through the B-Coater and onto the outlet conveyor. Out Conveyor Blanks are deposited on this side, lubricated and ready to be inserted into the press. In Conveyor Blanks are stacked on this side of the B-Coater and sent through as needed. Conveyor Rolls Heavy duty rolls strategically placed to support blanks on...

B-Coater Accessories Reservoir and Diaphragm Pump when used with the BC1012 – BC1048 Includes Reservoir, Diaphragm Pump and ONE fluid Solenoid Valve. FC7324 Four Gallon Reservoir w/one Solenoids FC7328 Eight Gallon Reservoir w/one Solenoids FC7330 Fifteen Gallon Reservoir w/one Solenoid Reservoir and Diaphragm Pump when used with the BC1112 – BC1148 Includes Reservoir, Diaphragm Pump and TWO fluid Solenoid Valve. FC7354 Four Gallon Reservoir w/Two Solenoids FC7358 Eight Gallon Reservoir w/Two Solenoids FC7360 Fifteen Gallon Reservoir w/Two Solenoids Low Level Controls Can give a visual or...