T APMATIC #1 G OLD

Product catalog summary

Overview: The document provides detailed information about a cutting fluid product, highlighting its benefits, features, applications, packaging options, and properties.

Specifications: The cutting fluid is suitable for all metals, including aluminum. It enhances tool life, improves surface finish, and requires less usage compared to traditional fluids. It is free from chlorinated solvents, chlorinated paraffins, water, solvents, and inactive fillers. It reduces cutting torque and improves efficiency, making it excellent for tapping applications.

Features: The fluid is applicable for various machining processes such as boring, broaching, drilling, engraving, facing, milling, reaming, sawing, tapping, threading, and turning.

Packaging: The product is available in different sizes: 11 wt. oz. aerosol (Part No. 40312), 16 fl. oz. (Part No. 40320), 1 gal. (Part No. 40330), 5 gal. (Part No. 40340), and 55 gal. (Part No. 40360).

Properties: The fluid is gold in color with a petroleum odor. It has a vapor pressure of <7 Pascals at 68°F, an evaporation rate of <0.1 (BuAc=1), a boiling point of 466°F, and a flash point of 300°F. Its specific gravity is 0.88-0.90 at 68°F, vapor density is >1, VOC content is 0 g/L, partition coefficient is <1, and viscosity is <100 mm²/second at 77°F.

Compliance: The product is qualified to Boeing BAC 5008 standards.

Additional Information: Material Safety Data Sheets are available upon request or on the LPS Laboratories website.

Catalog excerpts

Tapmatic ! #1 GoldCutting Fluid PACKAGES Net Content Part No. FEATURES • Great for all metals including aluminum • Increases tool life and improves surface finish • Requires less product usage than traditional cutting fluids • Does not contain chlorinated solvents or chlorinated paraffins • Reduces cutting torque and improves cutting efficiency • Does not contain water, solvents, or inactive fillers • Excellent for tapping applications Boring Broaching Drilling Engraving Facing Milling Reaming Sawing Tapping Threading Turning MATERIAL SAFETY DATA SHEETS AVAILABLE UPON REQUEST OR VISIT OUR WEB SITE : WWW.LPSLABS.COM LPS Laboratories • An Illinois Tool Works Company P.O. Box 105052 • 4647 Hugh Howell Road • Tucker, GA 30085-5052 • TEL: (800) 241-8334 or (770) 243-8800 • FAX: (800) 543-1563 or (770) 243-8899 Internet Web Site: www.lpslabs.com ©2010 LPS Laboratories • LPS® is a registered trademark of Illinois Tool Works • Printed in U.S.A. • All Rights Reserved • Form #2

Open the catalog to page 1

T APMATIC #1 G OLD

T APMATIC #1 G OLD

Catalog excerpts

All LPS Laboratories catalogs and technical brochures

Archived catalogs