Catalogs >
LPS Laboratories >
LPS 1 ® GREASELESS LUBRICANT

LPS 1 ® GREASELESS LUBRICANT
2Pages

Catalog excerpts

LPS 1® GREASELESS LUBRICANT LPS 1® Greaseless Lubricant is specially formulated to penetrate minute crevices, displace moisture, and leave behind a thin, dry lubricating film. It is the top choice for drying out critical electrical/electronic components and lubricating precision instruments. FEATURES ■ Provides a dry, thin, lubricating film ■ Resists oil, dust, and dirt build-up ■ Removes carbon build-up from surfaces ■ Displaces moisture ■ Loosens rusted or frozen parts ■ Provides a short term, light, corrosion resistant barrier ■ Ideal for delicate mechanisms ■ Safe on paint, fabric, and most plastics ■ Non-conductive ■ Used worldwide in aviation PACKAGE SIZES 20 fl.oz. (591 mL) trigger spray 00122 144 single wipes per case 00144 312 g/ 11 wt.oz. /379 mL aerosol (Canada) C30116 ■ VOC compliant in all 50 states ■ NSF® Registered H2 ■ Acceptable for use in Canadian Food Processing Establishments f \ SPECIFICATIONS AND APPROVALS Approved/Qualified toi ■ Allied Signal ES-2092 ■ Boeing B-737-500 Task 75-31-02-206-001-C00 ■ Bombardier (Canadair) BAMS 569-001 ■ Delta Airlines ■ Lockheed Martin EPSN G34.031 ■ Pratt & Whitney Canada CPMC 79255 Rev. C ■ Rolls Royce Overhaul Process 340 ■ Nonfood Compounds Program Listed Category Code: H2 Registration #059847 (Aerosol); #129040 (Bulk) ■ Acceptable for use in Canadian Food Processing Establishments ■ MIL-C-23411A ■ Cables ■ Circuit Breakers ■ Electronic Connectors ■ Generators Hinges Ignition Systems Locks Micrometers Molds Nuts and Bolts ■ Switch Gears Precision Open Gears ■ Weapon cleaner

Open the catalog to page 1

LPS 1®GREASELESS LUBRICANT PROPERTIES DIRECTIONS Mix well before using. Spray on clean surface. Use attached extension tube for pinpoint application. Safe to use on plastic, rubber and paint. Use only in well ventilated areas. Avoid all sources of ignition (spark or flame). STORAGE Keep container in a cool, well-ventilated area. Avoid all sources of ignition (spark or flame). Store between 40°F (5°C) and 120°F ( 49°C). Store aerosols as Level 3 Aerosol (NFPA 30B). Store all materials in a dry, well-ventilated area. Avoid breathing vapors. Appearance/physical state Liquid Waste must be...

Open the catalog to page 2