C orrosion Inhibitor F E AT U R E S • ulti-year protection of metal parts for M inside storage • 500+ hours salt spray resistance on 1 aircraft aluminum • Durable, dry, transparent film • ommonly used above floor level of C aircraft fuselages • esists dripping and running during R spray application • Low odor PA C K A G E S Net Contents 10 wt. oz. /284 g / 396 ml aerosol 1 gal. (3.78 liters) 5 gal. (18.93 liters) 55 gal. (208 liters) A P P L I C AT I O N S • Aircraft fuselages • Bare metal • Cargo sections • eady-to-use and can be applied with R conventional airless or air-operated spray equipment Quaified to: • Boeing BMS-3-23G Type II l • Bombardier CMS 565-06 Type I • Lockheed Martin Heavy Duty CPC 3a • Metal parts and machinery storage • Offshore drilling equipment • Outdoor electrical connections • Outdoor equipment and tools • Overseas storage or shipments • Underground installations P RO P E RT I E S Appearance/Physical State: Viscous red liquid Flash Point: (TCC) 110°F (43°C) Bulk HMIS: , 3, 0 (Aerosol) 1 1, 2, 0 (Bulk) Propellant: Hydrocarbon /Acetone blend Salt Spray Cabinet Test (ASTM B117): 1500+ hours on aluminum Specific Gravity (water=1): 0.88 Typical Dried Film Thickness: 33 microns/1.3 mils Viscosity at -4°F (25°C): 34 cSt VOC: 50.3% (aerosol), 51.4% (bulk) % non-volatiles: MATERIAL SAFETY DATA SHEETS AVAILABLE UPON REQUEST OR VISIT OUR WEB SITE : WWW.LPSLABS.COM LPS Laboratories • An Illinois Tool Works Company 4647 Hugh Howell Road • Tucker, GA 30084 • TEL: (800) 241-8334 or (770) 243-8800 • FAX: (800) 543-1563 or (770) 243-8899 Internet Web Site: www.lpslabs.com ©2012 LPS Laboratories • LPS® is a registered trademark of Illinois Tool Works • Printed in U.S.A. • All Rights Reserved • Form #2072 • Rev. 5/2012