BRIGHTCOAT COLD GALVANIZE CORROSION INHIBITOR

Product catalog summary

Product Overview: BrightCoat Cold Galvanize is a corrosion inhibitor that provides a shiny zinc coating to prevent rust and corrosion on all metals. It is designed to restore hot dip galvanizing and repair rusted, galvanized, and welded surfaces. The product dries to touch in 15 to 30 minutes and offers electrochemical protection to bare metal. It is heat resistant and flexible, ensuring it does not yellow, chalk, crack, or peel.

Features: The product is available in a 13 wt.oz. aerosol can (Part No. 05916). It conforms to specifications such as MIL-P-21035 and ASTM A-780 Weld thru primer.

Applications: BrightCoat is suitable for use on auto and truck bodies, construction machinery, exhaust stacks, farm machinery, HVAC equipment, machine housing, metal roofs, offshore rigs, outdoor furniture, pipes, structural steel, and weldments.

Handling and Storage: Avoid spraying near ignition sources and ensure adequate ventilation. Store in a cool, well-ventilated area below 120°F (49°C) and away from sparks or flames.

Directions for Use: Clean and dry the surface before application. Roughen polished surfaces with a wire brush. Shake the can vigorously and spray with a sweeping motion. Apply at temperatures above 45°F (7°C) and ensure the surface temperature is at least 5 degrees above the dew point. Do not apply to wet or damp surfaces.

Drying and Recoating: The product dries to touch in 15 to 30 minutes. Recoat after 6 hours of air drying or 30 minutes when baked at 350°F (177°C) for 15 minutes.

Properties: The product appears as a reflective silver-gray liquid with a solvent odor. It is insoluble in water and has a boiling point of 281°F (138°C). The zinc content in the dried film is 67-69%, and it provides corrosion protection for up to one year.

Safety and Environmental Information: The product has a flash point of <68°F (20°C) and is flammable. It contains VOCs at 237 grams/liter and has a specific gravity of 0.80-0.87 at 20°C.

Catalog excerpts

BRIGHTCOAT COLD GALVANIZE CORROSION INHIBITOR-1

CORROSION INHIBITOR BrightCoat can be used on all metals. It is excellent for repairing hot dip galvanizing or rusted surfaces and protecting bare or freshly welded metal surfaces. FEATURES ■■ Shiny zinc coating ■■ Prevents rust and corrosion on all metals ■■ Restores hot dip galvanizing ■■ Dries to touch in 15 to 30 minutes ■■ Electrochemically protects bare metal ■■ Heat resistant, flexible coating ■■ Will not yellow, chalk, crack, or peel SPECIFICATIONS AND APPROVALS Conforms to: ■■ MIL-P-21035 ■■ ASTM A-780 Weld thru primer PACKAGE SIZES Net Contents Auto and Truck Bodies Construction Machinery and Equipment Exhaust Stacks, Mufflers, and Manifolds Farm Machinery Heating and Air Conditioning Equipment Machine Housing Metal Roofs and Gutters Offshore Drilling Rigs and Trailers Outdoor Furniture, Tools, and Storage Pipes and Water Tanks Pulley and Chain Cover Restores Hot Dip Galvanizing Structural Steel Weldments TECHNICAL DATA SHEET ■■ Repairs rusted, galvanized, and welded surfaces CORROSION INHIBITOR BRIGHTCOAT COLD GALVANIZE

Open the catalog to page 1

BRIGHTCOAT COLD GALVANIZE CORROSION INHIBITOR-2

BRIGHTCOAT COLD GALVANIZE CORROSION INHIBITOR PROPERTIES Appearance/physical state Reflective silver gray Vapor pressure Auto ignition Temperature °C(°F) Boiling/Condensation point °C(°F) Flash point °C(°F) Specific gravity (water=1) °C(°F) Flash point method Zinc Content in Dried Film Flammable limits (estimated) Salt Spray Cabinet Test (ASTM B 117) Corrosion Protection DO NOT spray into or around ignition sources. After handling, always wash hands thoroughly with soap and water. Use only with adequate ventilation. Avoid breathing vapors or spray mists. Keep container in a cool, well-ventilated...

Open the catalog to page 2