video corpo cad

HV 2.015 HV 4.220
12Pages

{{requestButtons}}

Catalog excerpts

HV 2.015 HV 4.220 - 1

HYDROVAR Increased flexibility and control with new generation

Open the catalog to page 1
HV 2.015 HV 4.220 - 2

HYDROVAR, the modern variable speed pump drive is taking pumping to a new level of flexibility and efficiency.

Open the catalog to page 2
HV 2.015 HV 4.220 - 3

Motor or wall mountable More flexibility Cost savings High level hardware design Simple mounting ”clip & work” Multipump capability up to 8 pumps HYDROVAR is not only a simple to use speed control system for direct motor mounting. In fact the HYDROVAR product represents an intelligent control system which accurately adapts the demand und offers plenty of advantages for both the operator and the system. Unique modular design needs no additional master control and enables virtually any configuration of pumps: up to 8 master drives or a mix of master and slave drives. This is the long-awaited...

Open the catalog to page 3
HV 2.015 HV 4.220 - 4

Technical Data HYDROVAR Power supply Rated output Recommended line protection Rated current output

Open the catalog to page 4
HV 2.015 HV 4.220 - 6

Advantages The new HYDROVAR concept allows optimum flexibility and ensures cost savings not only during operation but also in purchasing and commissioning Error Log with date and time stamp and included diagnostic menu to view temperature, current and quality of power supply facilitates diagnostics and failure analysis Easy operation and programming due to the improved menu navigation and the backlight display - even in difficult accessible installations Easy to integrate into building services management systems with MODBUS interface included as standard Integrated function to protect...

Open the catalog to page 6
HV 2.015 HV 4.220 - 7

Advantages Easy assembly of multi pump systems up to 8 pumps without any external control units or other superior control systems Greater redundancy and additional application possibilities like zone regulation with 2 connected actual value sensors Integrated dry-run protection and shut-off the system in case of pipe burst Extended manual control mode with either external as well as internal set points of different speed levels

Open the catalog to page 7
HV 2.015 HV 4.220 - 8

RETROFITTING is possible on all existing standard asynchronous motors, which are suitable for VFD operation. Automatic adjustment of the pump performance to varying demands. Constant system pressure in water supply and booster stations. Possibility of control along the system curve for circulation pumps for the HVAC market. No external panels, contactors and motor protection devices are required. All hydraulic control functions are included in the HYDROVAR. Therefore no additional external controllers are required. Optimised cooling of the HYDROVAR, depending on the power and the speed of...

Open the catalog to page 8
HV 2.015 HV 4.220 - 9

Clip & Work Especially in   the operation at partial loads of a centrifugal pump there will be significant potential of energy savings! „TÜV-approved” Example: Circulation pump with nominal power in partial load operation. Power consumption as per curve Saving per 1/3 year (2.920 hours) Pump at constant speed Pump at variable speed Energy savings within 1 year (8.760 hours) Compared with the installation costs for the HYDROVAR units there will be a payback time of less than one year (depending of the energy costs).

Open the catalog to page 9
HV 2.015 HV 4.220 - 10

Product Overview - Hardware configurations Single Pump Operation m Using one Basic Inverter for soft start/stop function m Using one Single Inverter for speed controlled function Basic Inverter Single Inverter Multi Pump Operation (Cascade Controller - Relay) m Using one Master Inverter (incl. optional relay card) to control up to 5 full speed slave pumps Switch board Up to 5 full speed slaves Master Inverter

Open the catalog to page 10
HV 2.015 HV 4.220 - 11

Multi Pump Operation (Cascade Controller - Serial or Synchronous) m Using several Master Inverters and Basic Inverters in combination (up to 8 pumps can be combined) Mixed installation of master and slave HYDROVAR Basic Inverter Basic Inverter Basic Inverter Master Inverter Master Inverter Master Inverter Master Inverter Master Inverter

Open the catalog to page 11
HV 2.015 HV 4.220 - 12

Xylem 1) The tissue in plants that brings water upward from the roots; 2) a leading global water technology company. We’re 12,000 people unified in a common purpose: creating innovative solutions to meet our world’s water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water efficiently, in their homes, buildings, factories and farms. In more than 150 countries, we have strom, long-standing relationships with customers...

Open the catalog to page 12

All LOWARA catalogs and technical brochures

  1. CO-SHO Series

    104 Pages

  2. Lowara e-SH

    4 Pages

  3. CO Series

    20 Pages

  4. GEM leaflet

    3 Pages

  5. ecocirc PRO

    5 Pages

  6. e-Range 50Hz

    28 Pages

  7. e-NSC

    4 Pages

  8. RainPerfect

    2 Pages

  9. GENYO

    8 Pages

  10. Floodkit

    2 Pages

  11. e SV

    4 Pages

  12. DDC Pump

    4 Pages

  13. Aquontroller

    2 Pages

  14. Aquada UV

    2 Pages

  15. AquaCharge

    2 Pages

  16. AG JEC

    4 Pages

  17. e-HM

    7 Pages

  18. SCUBA, GS

    92 Pages

  19. ECOCIRC

    8 Pages

  20. FC-FCT

    45 Pages

  21. SVI - 50 Hz

    56 Pages

  22. e-SV

    4 Pages

  23. BG series

    3 Pages

  24. SP series

    3 Pages

  25. CO - 60 Hz

    20 Pages

Archived catalogs