Endsuction Pumps Vogel Series LS, LC, LCP
12Pages

Endsuction Pumps Vogel Series LS, LC, LCP

Design LS Technical Data Performance Range: m m m Capacity up to Head up to Speed up to DN 125 up to DN 600 (5” up to 24”) discharge, Size DN 32 up to DN 150 (1 1/4” up to 6”), refer to design LSN up to 16bar (174/230 psig) For higher casing pressures refer to design LC/LCP Clean or slightly contaminated liquids (without bigger solids) Cold and hot water Condensate and deiomized water Oil brine and acid Paper stock suspensions up to 1,2% General industry Chemical industry Steel mills and mining Sugar industry Pulp and paper mills Materials: Casing, Casing cover Cast iron Bearing frame Other...

Total head [ft] [ft] Förderhöhe Capacity Förderstrom Design LSN refer to separate brochur

Design Variations Design LS: Horizontal single stage endsuction pump with closed impeller and oil lubricated bearing frame. Process design, back pull out for easy maintenance. Disassembly of impeller and bearing frame without dismantling of pump casing and motor possible (spacer type coupling required). Suction branch axial, discharge radial upwards (optional horizontal possible). Drive by electric motor and flexible coupling arranged on common base plate. Vertical design with short shaft for dry installation. Bearing frame with grease lubricated antifriction bearings. Motoradapter welded...

Horizontal single stage endsuction pump with closed impeller. Process design, back pull out for easy and safe maintenance. Disassembly of impeller and bearing frame without dismantling of pump casing and motor possible (spacer type coupling required). Thrust bearing at drive side (pair of angular contact bearings) for high load capability in both directions, roller bearing at pump side. Solid shaft dimension for low shaft deflection and heavy duty oil lubricated bearings for continuous operation. Stainless steel version in dry shaft design, shaft and threads protected by closed impeller nut...

Design LC casing foot mounted Design LCP with centerline casing feet Technical Data Performance Range: m m m Capacity up to Head up to Speed up to DN 125 up to DN 400 (5” up to 24”) discharge, Size DN 32 up to DN 150 (1 1/4” up to 6”), refer to design ICP Clean and slightly contaminated liquids (without bigger solids) Cold and hot water Condensate and deiomized water Oil brine and acid General industry, power stations, district heating Chemical industry Sugar mills Pulp and paper mills Materials: Casing, Casing cover Other materials upon request Wear rings Bearing frame Shaft sleeve...

Design ICP refer to separate brochure

Design LC: Foot mounted casing design for operating temperatures up to max. 180°C (350°F) / 25bar (360psig). Design LCP: Process design with centerline casing feet for operating temperatures up to max. 210°C (410°F) / 25bar (360psig). Due to the centerline casing feet and the additional support feet a negative influence is avoided on the coupling alignment caused by thermal expansion of the casing at high operating temperatures. At operating temperatures above 180°C (350° F) oil sump cooling of the bearing frames is requir

Horizontal single stage endsuction pump with closed impeller.  Design IC with foot mounted casing for operating temperatures up to 180o C (350oF).  Design LCP with centerline casing feet for operating temperatures up to 210oC (410o F). Process design, back pull out for easy and safe maintenance. Disassembly of impeller and bearing frame without dismantling of pump casing and motor possible (spacer type coupling required). Thrust bearing at drive side (pair of angular contact bearings) for high load capability in both directions, roller bearing at pump side. Solid shaft dimension for low...

Shaft sealing: Design LS, LC, LCP Stuffing box optional with internal or external flush for temperatures up to 140°C (280°F) Design LS, LC, LCP Stuffing box with cooling jacket for temperatures up to 180°C (350°F) Design LS Single mechanical seal acc. to EN 12756 (DN 24960) unbalanced Design LS, LC, LCP Single mechanical seal acc. to EN 12756 (DN 24960) balance

Design LS, LC, LCP Cartridge seal, single mechanical seal (Optional with quench or double mechanical seal Design LS, LC, LCP Single balanced mechanical seal in „dead end” configuration for hot water applications ISO 9001 + 14001 certifications guarantee high quality standards and reliability of our products as well as environmentally friendly production process

Xylem 1) The tissue in plants that brings water upward from the roots; 2) a leading global water technology company. We’re 12,500 people unified in a common purpose: creating innovative solutions to meet our world’s water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water efficiently, in their homes, buildings, factories and farms. In more than 150 countries, we have strom, long-standing relationships with customers...