Coolant Filtration Systems for Machine Tools

Polluting Agents into Coolants

Coolant Filtration System 1800 l/min. Neat Oil on Honing Machining of Steel Tubes n° 2 Magnetic separators DMDP 1800 n° 1 Sedimentation dredge DR 1500 n° 2 Mud compactors CV 150

Multiple Drums Spring Filtration System Model F6 /5 Max. flow 2500 l/min.

Centralized Filtration System DR 2000 + DMDP 1500 + Medio Master 800 max. flow 1500 l/min.

Centralized Filtration System Master Hydrostatic Filtration System Mud Compactors CV 150

Centralized Filtration System DR 1500 + DMDP 1800 + CV 150 + Darwin + Synthesis max. flow 800 l/min. of oil

Examples Grinding Machining Centralized Filtration System Neat oil Flow 900 l/min. Filtration 40 micron Super-Fine Grinding Machining Centralized System. Emulsion Flow 800 l/min. Filtration 30 micron

Centralized Filtration System 1000 l/min. Magnetic Separator DMD Self-Cleaning Drum Spring F7

Details of the Centralized System Pump station with inverter and constant pressure regulation system. Coolant flow 200 to 1000 l/min. Pressure 0,3 mPa constant and continuous Special pumps station, raising with S system for protection of restraint valves 1+1 sunken raising pumps with centrifugal-screw for very loaded liquid containing high concentrations of conglomerates of mud, foams and air.

High Flow Filtration System Spring F9 Coolant: Neat Oil Machining: deep drilling 800 l/min Filtration 30 micron

Compact Spring Version Reduction in periodical cleaning of the tanks. Thanks to the self-cleaning, dredging system, and the greater dimension of the dirty tank, sedimentation of the polluting particles is reduced and the clean liquid taken into the pumps does not allow the micron parts to deposit. Another advantage is the machine’s compactness.

The “Heart” of the Filter: the Drum Details: View of the drum group. Carbon steel electro-welded and zinked. Filtration net in stainless steel AISI 304

The Counter-Pressure Cleaning System Detail of the counter-pressure net washing system

Metallic net in stainless steel AISI 304 used as a filtration element on a drum filter . 50 micron net example. Filtering capacity: sphere up to 0,05mm of diameter.

High Pressure Machinings Spring F3 with 3 pumps for clean coolant on a machining center Flow rate 150 l/min. Emulsion High pressure pump and filter.

High Pressure Machinings Spring F3 with 3 pumps for clean coolant on a machining centre Flow rate 150 l/min. Emulsion High pressure pump and filter.

High Pressure Machinings Spring F5 with 2 pumps for clean coolant on a machining centre Flow rate 300 l/mn. Emulsion High pressure pump with proportional regulation valve and security system

High Pressure Machinings High pressure station for grinding on aerospacial components. Emulsion Flow 80 l/min. Pressure 80 bar

High Efficiency Systems Super-filtration stations 3 micron Smaller flow hydrostatic filters Mini Master Transfer-tanks Hydrostatic filters for high flows Master AB Mud compactors

ROTOMAG High efficiency magnetic bar separator. For all cases with need to eliminate ferro-magnetic particles from coolants.

Other Systems for Coolant Filtration Spring F9/2 Emulsion flow 4000 l/min. Neat oil flow 2000 l/min. Magnetic Scraping Chip Conveyors. Combined systems for conveying mud and chip.