*mydirectindustry

QFMF

Product catalog summary

Specifications
The document provides detailed specifications for full cone nozzles, including spray angles of 50°, 90°, and 120°. The capacity at various pressures (from 0.7 kgf/cm² to 15 kgf/cm²) is listed, along with average particle size, minimum free passage, and filter mesh requirements. The nozzles are designed for precise distribution and are available in different materials such as PVDF, U-PVC, and PEEK.

Features
The nozzles feature a holeless multi-slotted core for uniform impact, a two-piece design for easy installation, and various gasket options to accommodate different chemicals. The design ensures a secure fit to prevent leakage.

Applications
These nozzles are suitable for cleaning (gas, exhaust, dust, tanks), cooling (gas, tanks, machinery, metal, roofs), and dispersion (humidifying, dust suppression).

Ordering Information
Standard pressure is highlighted in red, and custom orders can be made for spray angles of 90° and 120°. The recommended working pressure is 2.0 kgf/cm² with a flow rate tolerance of ±5% and an angle tolerance of ±5°.

Material and Design
The nozzle tip is made of PVDF, with core options in U-PVC and PEEK. The body can be made from PVDF, PP, or U-PVC. The design includes a top view of the spray pattern and flow distribution.

Catalog excerpts

LORRICPlastic easy install full cone nozzle for precise distribution Full Cone Nozzles • Recommended working pressure: 2.0 kgf/cm2 • Flowrate tolerance: ± 5% @ 2.0 ± 0.1 kgf/cm2 • Angle tolerance: ± 5° @ 2.0 ± 0.1 kgf/cm2 [ Top view of nozzle spray pattern 1 ■ Features • Full cone spray. • Adopts a Holeless multi-slotted core, possess a more uniform impact than other standard solid cone nozzles of the same type. • Two piece nozzle design which includes nozzle and the body allows quick and accurate installation by hand. It is convenient for on-site management. Nozzle tip is secured into the body and fastened by three buckle points to avoid the nozzle tip loosening and ensure the performance quality. • The internal gaskets are available in various options such as EPDM, Viton and Viton-F, which can be adapted to various types of chemicals. With special structural design, the nozzles can be closely attached to the base to avoid water leakage. ^ For MPa / bar / psi units, please refer to LORRIC.com.

Open the catalog to page 1

^ For MPa / bar / psi units, please refer to LORRIC.com. Full Cone Nozzles

Open the catalog to page 2

All Lorric catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list