LORRICEductor nozzle for mixing Recommended working pressure: 0.5 kgf/cm2 • Flowrate tolerance: ± 10% @ 0.5 ± 0.1 kgf/cm2 ■ Features • Used for liquid stirring under the liquid surface. Specially (Quantity supplied+Intake=Total Flow). designed nozzle that creates a stirring and circulating • Single piece structure and hand installable without any tools. effect. This nozzle can mix chemicals, direct the suspended substances to a filter and prevent precipitation. • Energy-efficiency of liquid stirring: the eductor nozzles are designed to suck and spray liquid through the amplified nozzle tube to increase liquid flow rate up to 4 times which provides more efficient stirring than aeration or robot arms ■ Applications • Cleaning: scrubber, off-gas treatment, etc. • Cooling: cooling tower, etc. • Dispersion: firefighting. Other Nozzles ■ Material - • Strengthened Pipe Fiberglass PP • Stainless 316 (Only 3/8") How to pleace an order for LORRIC nozzles? Example: 3/8 BSPT ED 152 - FRPP t t t t t t Thread Thread Capacity Capacity Spray Material Type Size Code Code Angle ^ Standard Pressure: Column in red. ^ For MPa / bar / psi units, please refer to LORRIC.com.