Catalog Lorric
1 / 128Pages

paranoid about performance Nozzle And Flowmeter Product Catalogue

LORRIC is a Taiwanese manufacturer of industrial nozzles and flow meters established in 1991, and since then has dealt in independent research and development, design, production, marketing, and sales. LORRIC’s products are 100% made in Taiwan. The philosophy we believe in, as mentioned below, leads us to design and manufacture supreme products while improving and growing with our clients. Consistently self-challenging, we settle on only producing the highest quality nozzles through our uncompromising attitude. At LORRIC, we pride ourselves in creating industry-used high-grade nozzles...

Full Cone Nozzles Ho llow Cone Nozzles Other Nozzles Nozzle Accessories Flat fan nozzle’s estimated spray coverage Immediately understanding how to read “Flow Rate” Comparison of particle size of 3 common kinds of nozzles 3 facts you must know about “spray angle” Impact vs pressure distr ibution

Flat Fan Nozzles paranoid about performance

Single piece flat fan nozzle 【 Top view of nozzle spray pattern 】 【 Flow distribution 】 PP material: 2 ● Recommended working pressure: 3.0 kgf/cm 2 ● Flowrate tolerance: ± 10% @ 3.0 ± 0.1 kgf/cm 2 ● Angle tolerance: ± 10° @ 3.0 ± 0.1 kgf/cm ● Jet angle tolerance: 3° Other materials: 2 ● Recommended working pressure: 3.0 kgf/cm 2 ● Flowrate tolerance: ± 5% @ 3.0 ± 0.1 kgf/cm 2 ● Angle tolerance: ± 5° @ 3.0 ± 0.1 kgf/cm ● Jet angle tolerance: 3° is straight column, spray Fog shape is a single point, providing the best impact in all nozzle types. ● When the fan nozzle is used in high pressure...

^ For MPa / bar / psi units, please refer to LORRIC.com.

Spray Angle ^ For MPa / bar / psi units, please refer to LORRIC.com.

^ For MPa / bar / psi units, please refer to LORRIC.com.

LORRICSingle piece high chemical resistance plastic flat fan nozzle Recommended working pressure: 3.0 kgf/cm2 • Flowrate tolerance: ± 5% @ 3.0 ± 0.1 kgf/cm2 • Angle tolerance: ± 5° @ 3.0 ± 0.1 kgf/cm2 • Jet angle tolerance: 3° ■ Features • The spraying type is fan type, and the spray shape is single- • PVDF is resistant to temperature and corrosive chemical line and the two sides are tapered (tapered Edge), which solutions. presents a bell curve shape flow field distribution with weaker ends compared to the middle. • One-piece design. • Cleaning: Vehicles, containers, filters, dust, gravel,...

^ For MPa / bar / psi units, please refer to LORRIC.com.

Spray Angle ^ For MPa / bar / psi units, please refer to LORRIC.com.

^ For MPa / bar / psi units, please refer to LORRIC.com.

LORRICHigh chemical resistance plastic flat fan nozzle for small flow rate • Recommended working pressure: 3.0 kgf/cm2 • Flowrate tolerance: ± 5% @ 3.0 ± 0.1 kgf/cm2 • Angle tolerance: ± 5° @ 3.0 ± 0.1 kgf/cm2 • Jet angle tolerance: 3° ■ Features The spraying type is fan type, and the spray shape is single • PVDF is resistant to temperature and corrosive chemical line. Both sides are tapered (tapered Edge), which presents a solutions. bell curve shape flow field distribution with weaker ends at the middle. One-piece design. For 1 kgf/cm2 working pressure, customized design needed. •...

^ For MPa / bar / psi units, please refer to LORRIC.com.

Spray Angle ^ For MPa / bar / psi units, please refer to LORRIC.com.

^ For MPa / bar / psi units, please refer to LORRIC.com.

CH Easy maintenance metal flat fan nozzle Flat Fan Nozzles • Recommended working pressure: 3.0 kgf/cm2 • Flowrate tolerance: ± 5% @ 3.0 ± 0.1 kgf/cm2 • Angle tolerance: ± 5° @ 3.0 ± 0.1 kgf/cm2 • Jet angle tolerance: 3° ■ Features • Spray type is fan type, spray shape is single-lined and tapering on both sides (Tapered Edge), which presents a bell curve shape flow field distribution with weaker ends at the middle. • Three-piece structure facilitates maintenance cleaning and replacement, and can save the cost of replacing the nozzle head. Expenditure filter design, easy maintenance,...

^ For MPa / bar / psi units, please refer to LORRIC.com.

Spray Angle ^ For MPa / bar / psi units, please refer to LORRIC.com.

^ For MPa / bar / psi units, please refer to LORRIC.com.

PF Low pressure and wide angle plastic flat fan flood nozzle Flat Fan Nozzles Recommended working pressure: 1.5 kgf/cm2 • Flowrate tolerance: ± 10% @ 1.5 ± 0.1 kgf/cm2 • Angle tolerance: ± 10° @ 1.5 ± 0.1 kgf/cm2 ■ Features The spray pattern is fan type, and the spray shape is single-line. • Low-pressure wide-angle nozzle realizes a large angle coverage under 1.5kgf/cm2 pressure, which is lower than standard fan type 3kgf/cm2 operating pressure and is more suitable for low-pressure working environment. • Spray the nozzle at an angle of 75° with respect to the axis of the nozzle. Check that...

• Flowrate tolerance: ± 10% @ 1.5 ± 0.1 kgf/cm2 • Angle tolerance: ± 10° @ 1.5 ± 0.1 kgf/cm2 ■ Features The spray pattern is fan type and the spray shape is single. • Low-pressure wide-angle nozzle realizes a large-angle coverage area under 1.5kgf/cm2 pressure, which is lower than standard fan type 3kgf/cm2 operating pressure, and is more suitable for low-pressure working environment. • Spray the nozzle at an angle of 75° with respect to the axis of the nozzle. Check that the environment is suitable. The hooked nozzle tip is designed to reflect the water into a fan shape nozzle and greaten...

High chemical resistance plastic easy install flat fan nozzle Flat Fan Nozzles • Recommended working pressure: 3.0 kgf/cm2 • Flowrate tolerance: ± 5% @ 3.0 ± 0.1 kgf/cm2 • Angle tolerance: ± 5° @ 3.0 ± 0.1 kgf/cm2 • Jet angle tolerance: 3° ■ Features • The spraying type is fan type, and the spray shape is single line and two sides are tapered (tapered edge), which presents a bell curve shape flow field distribution with weaker ends compared to the middle. Products with special flow field distribution can be customized. • Two-piece quick-release design is divided into two parts: the nozzle...