Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. LOROCH
  3. TC-700

TC-700

TC-700
1 / 2 PagesView full catalog

TC-700

Product catalog summary
Overview: The Loroch TC 700 is an inspection unit designed for precision measurement of HSS circular saw blades. It allows for the inspection of various parameters such as chamfer-width, symmetry, chip breaker groove, chamfer angle, tooth contour, and localizing cracks.
Specifications: The TC 700 can measure saw blades with diameters ranging from approximately 40 to 700 mm. It uses a camera that can swivel for measurements in different planes and offers magnifications of 20x, 30x, and 60x. The maximum display detail is 14 x 8 mm at 20x magnification.
Measurement Capabilities: The unit can measure hook and clearance angles, tooth height and differences, tooth pitch, tooth gullet radius, chamfer angle and width, and the depth and length of chip breaker grooves.
Components: The system includes a mechanical adjusting device, a high-quality video unit, separate lamps for transmitted and reflected light measurements, a saw blade holding fixture, and a laptop with specialized image processing software.
Software: The Windows®-based software is user-friendly, allowing data to be saved directly in images with notes. Images can be printed in photographic quality or sent via email. The software supports multiple languages including German, English, French, Italian, Spanish, and Portuguese.
Contact Information: Loroch GmbH, Josef-Loroch-Str. 1, 69509 Mörlenbach, Germany. Phone: +49 (0)6209 7159-50, Fax: +49 (0)6209 7159-38, Email: [email protected], Web: www.loroch.de
Note: Technical changes are reserved as per the version dated 03/2016.
See more

Catalog excerpts

TC-700-1

PLanatJi TC 700 Inspection unit Turbo Check 700

 Open the catalog to page 1
TC-700-2

TC 700 The Loroch TC 700 allows precision measurement of all the key data of HSS circular saw blades, which can then be saved with the relevant images, printed out or sent direct by e-mail. The measuring principle is similar to that of a conventional profile projector except that measurements can be conducted with either transmitted or reflected light. What’s more, the camera can be swivelled to allow measurements in other planes. Measurements are performed with 20 x/30 x/60 x magnification, either in transmitted mode ( as in a profile projector ) or incident mode. The maximum adjustable display...

 Open the catalog to page 2

All LOROCH catalogs and technical brochures

  1. evolution K850-M
    evolution K850-M

    6  Pages

  2. AB 500
    AB 500

    2  Pages

  3. SW BA 80N
    SW BA 80N

    2  Pages

  4. SBS 80
    SBS 80

    2  Pages

  5. TC 720
    TC 720

    2  Pages

  6. TC 700
    TC 700

    2  Pages

  7. PowerStar 850
    PowerStar 850

    4  Pages

  8. SW 630–ST
    SW 630–ST

    2  Pages

  9. CNBS 100
    CNBS 100

    4  Pages

  10. CNBS 80
    CNBS 80

    4  Pages

  11. SW 630 ? ST
    SW 630 ? ST

    2  Pages

  12. SW BA 60 / SW BA 80N
    SW BA 60 / SW BA 80N

    2  Pages

  13. SW 450
    SW 450

    4  Pages

  14. Type 1000
    Type 1000

    2  Pages

  15. KSC 710
    KSC 710

    4  Pages

  16. KSC 710 Basic
    KSC 710 Basic

    4  Pages

  17. solution K850
    solution K850

    4  Pages

  18. EKOSTAR 760
    EKOSTAR 760

    2  Pages

  19. EKOSTAR 500
    EKOSTAR 500

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.