Introduction
The document provides technical details about the SBS 80, an automatic machine designed for setting saw bands, which complements the SW BA 80N band saw sharpening machine.

Specifications
The SBS 80 is suitable for CV saw bands with a width of 10 – 80 mm and a tooth pitch of 5 – 35 mm. It is mechanically controlled and powered by an electric motor. The machine allows pre-selection for setting with or without a clearing tooth using a toggle lever.

Safety and Operation
For safety, the machine is equipped with a Plexiglas cover, which can be fully opened for setup. However, automatic operation is only possible with the cover closed. The machine is user-friendly, with adjustment screws for setting the saw band width, tooth pitch, and set dimension.

Technical Data

• Working Range: Saw band width 10 – 80 mm, tooth pitch 5 – 35 mm, blade thickness 0.5 - 1.2 mm, saw band length up to 5000 mm (without additional roll).
• Working Speed: 140 teeth per minute.
• Electrical Installation: Power consumption of the machine is 0.2 kVA.
• Weight: Net weight of the machine without roller cross is approximately 70 kg.
• Dimensions: 740 x 600 x 1350 mm (without roller cross).

Contact Information
Loroch GmbH, a company of the VOLLMER Group, located at Josef-Loroch-Str. 1, 69509 Mörlenbach, Germany. Phone: +49 (0)6209 7159-50, Fax: +49 (0)6209 7159-38, Email: [email protected], Website: www.loroch.de.

Additional Information
Technical changes and printing errors are reserved. More information and product videos are available on the company's website.