sharp solutions! J> The new generation of a low-cost, high-tech sharpening machine for band saws.

CNBS 80 The CNBS 80 is the ideal machine for sharpening CV, bimetal and carbide-tipped band saws with widths of 8 – 80 mm. It operates with CBN or diamond grinding wheels using water cooling. The operation on programming of the machine is a simple procedure. All relevant data such as tooth shape, hook and clearance angle, infeed, working speed, etc. are entered via a display. The feed speed of the grinding wheel can be steplessly adjusted. The same grinding wheel can be used to grind a variety of pitches. In fact, it is possible to cover all permissible pitch ranges with just 2 different wheels....

The operator selects the desired tooth pitch. All tooth parameters are adjusted to the new tooth pitch, perhaps the hook angle has to be changed. Whenever the same tooth profile will be ground again at a later time, the operator enters only the desired program number. The programming of the actual sharpening program is just as simple. After selecting a specific tooth profile the machine automatically suggests a suitable feed and speed for the grinding wheel. These values can be adapted or modified as desired. The advanced programming feature makes it possible to create unique tooth profiles with...

CNBS 80 Advantages at a glance Simple operation Freely programmable tooth profiles Excellent surface finish thanks to CBN or DIA grinding wheel plus water cooling Low noise and dirt generation A variety of tooth pitches can be ground with the same grinding wheel Grinding wheel dressing not necessary Short setup times Good cost / performance ratio Coolant tank integrated in machine stand with easy access Robust design Technical Data Working range 8 – 80 mm approx. 3 – 34 mm approx. 0.5 – 3 mm min. 1400 mm rather 2800 mm, max. 7000 mm ( longer lengths possible on request ! ) Standard programs for...