PLanadi sharp* solutions! CNBS 100 CNC-controlled sharpening machine for band saws JJ The next generation of our high-tech sharpening machine for band saws.

CNBS 100 The CNBS 100 is the ideal machine for sharpening CV, bimetal and carbide-tipped band saws with widths of 8 – 100 mm. It operates with CBN or diamond grinding wheels using water cooling. The programming of the machine is a simple procedure. All relevant data such as tooth shape, hook and clearance angle, tooth pitch, infeed, working speed, etc. are entered via a display. The feed speed of the grinding wheel can be steplessly adjusted. An electronic hand-wheel is used to position the grinding wheel in reference to the tooth position. The same grinding wheel can be used for many different...

Whenever the same tooth profile will be ground again at a later time, the operator enters only the desired program number. The programming of the actual sharpening program is just as simple. After selecting a specific tooth profile the machine automatically suggests a suitable feed and speed for the grinding wheel. These values can be adapted or modified as desired. The advanced programming feature makes it possible to create unique tooth profiles with up to 6 selectable tooth profile parameters – as shown in the example on the right side. These consist of straight lines and radii. Outline with...

CNBS 100 > Loroch sharp solutions! Advantages at a glance 7 Simple operation 7 Freely programmable tooth profiles 7 Excellent surface finish thanks to CBN or DIA grinding wheel plus water cooling 7 Low noise and dirt generation 7 A variety of tooth pitches can be ground with the same grinding wheel 7 Grinding wheel dressing not necessary 7 S hort setup times 7 S hort processing times 7 Coolant tank integrated in machine stand with easy access 7 Robust design 7 G ood cost / performance ratio Without roller cross approx. 1500 x 1600x 1820 mm With roller cross approx. 2400 x 1600 x 2700 mm...