LORENZ MESSTECHNIK GmbH Sb^AKf'131 PAX-DP Programmable 2-Channel Industry-Built-In Measuring Device O Display Freely Scalable O 2 Galvanically Separated Input Channels O Extendable by up to 3 Output Cards O Up to 105 Measurements/s O Minimum-Maximum Value Display O Short Length Design (Depth 104 mm) O Level of Protection IP65 on Front Side effected by keys or by the 2 programmable inputs. The inputs can by adjusted by jumpers PNP- or NPN-. A linearization of up to 16 steps is possible. Both devices are equipped with an easy to change backlight unit display. The 2-channel device has 2 galvanically separated ±10V or ±20 mA inputs. Thus, this device is especially suitable for dual-range sensors with active output signals. The display channel can be switched over by keystroke or by a control input. Each measuring channel has its own parameter set, the output cards can be assigned freely and both measured values can be transferred via the interface. The device can be fitted and/or refitted with the most various output cards. Maximal, the device can be equipped with one limit value output, one analog output and one interface slot. Each PAX unit is also available as a LPAX-model. LPAX has a large display (38 mm height LED-unit) which is legible from a distance of 20 m. Specifications Type Sensor Side Excitation Miscellaneous Service temperature range Options/ Accessories Art.-No. E-Mail: [email protected] Technical changes under reserve 080680c.doc Internet: www.lorenz-sensors.com