- Catalogs
- Lorenz Messtechnik
- GM41-NT
GM41-NT
GM41-NT
- Stabilized and adjustable output voltage from 23 to 28.5VDC.
- Input voltage range of 100 to 240VAC, with low stand-by consumption of less than 1W.
- Constant current characteristic without switching off during overload.
- DC OK signaling and parallel operation option.
- High efficiency and short circuit protection.
- Complies with UL60950, UL508, and EN 60335-1 standards.
- Input voltage range: 85 to 264VAC (120 to 373VDC).
- Rated frequency range: 44 to 66 Hz / 0 Hz.
- Output rated voltage: 24VDC, with a range of 23 to 28.5VDC.
- Output rated current: 1A, with limited current of 1.25 to 1.4A.
- Efficiency: 86% with a power factor of 0.48.
- Service temperature range: -25 to 70°C.
- Dimensions: 22.5 x 90 x 90.5 mm, weight: 130g.
- Designed for horizontal mounting on standard DIN TH 35 rails.
- Natural convection cooling method with specific spacing requirements.
- Level of protection: IP20, Safety class II without PE connection.
Catalog excerpts
LORENZ MESSTECHNIK GmbH Power Supply Unit 24VDC, 24 Watt for DIN Mounting Rail Stabilized and adjustable Output Voltage from 23 .. 28.5VDC 100 .. 240VAC Input Low Stand-by Consumption <1 W Constant Current Characteristic without switching off by an Overload DC OK Signaling Parallel Operation Option High Efficiency Short Circuit Protected Overload Protection UL60950, UL508, listed Class II Panel Installation on Mounting Rails Push-In Terminals Description The GM 41-NT is an efficient, primary switched mode power supply unit for use in switch cabinets, clip fastening TH 35-rail assembly in slim design. A powerful and flexible option that's still light and compact. By its wide range input it is world-wide applicable. The output voltage is adjustable in the front and it is short circuit protected. By regulator controller technology, high efficiency and thus small heat development are ensured. The DIN rail fastening method and push-in connection terminals enable fast and secure mounting. The GM 41-NT is also comply with the EN 60335-1 standard for domestic appliances. E-Mail: [email protected] Internet: www.lorenz-sensors.com Technical changes under
Open the catalog to page 1
E-Mail: [email protected] Internet: www.lorenz-sensors.com Technical changes under reserve
Open the catalog to page 2All Lorenz Messtechnik catalogs and technical brochures
DK-153 Pages
ALMEMO® 2027 Pages
DR-205 Pages
GM771 Page
DD-20023 Pages
PAX-LC-TG1 Page
GM80-PA2 Pages
Digital Weighing Indicator4 Pages
PAX2 Pages
PAX-DP1 Page
GM802 Pages
K-15632 Pages
K-1002 Pages
DR-2643, DR-2643-P5 Pages
D-24313 Pages
K-11072 Pages
DR-15 Pages
DR-24 Pages
DV-143 Pages
D-2452, D-2452-P6 Pages
TORQUE SENSOR DR-25544 Pages
Amplifier Catalog4 Pages
Sensor Catalog8 Pages
- Display module
- Test machine
- Force sensor
- Test stand
- Tension/compression force transducer
- Steel load cell
- Calibration system
- Strain gauge force sensor
- Digital indicator
- Stainless steel force transducer
- Weighing force transducer
- Panel panel meter
- Signal amplifying integrated circuit
- Beam type force sensor
- Weighing terminal
- Electronic display panel
- Compression force transducer
- Universal testing machine
- Programmable display system
- Digital weight indicator-transmitter