Reject-Valve AEQ
8Pages

MARTIN LOHSE GmbH Unteres Paradies 63 · D-89522 Heidenheim Postfach 1565 · D-89505 Heidenheim phone +49(0)7321 / 755-42 · fax +49(0)7321 / 755-97 server.ab@lohse-gmbh.de www.lohse-gmbh.d

Type: AEQP/G Applications General usage pulp and paper production media with reject fraction (e.g. nails and staples) coarse-grained media granulates powders temperature range to 80 °C see table for permitted operating pressure Locations chemical industry • extraction devices for heavy soiling applications • dumping and emptying devices for heavy soiling applications • cleaning machines high proportion of reject parts granular material and powders Accessories On the inlet side: stainless steel intermediate flange, allows connection to round DIN EN 1092-1, PN 10 pipes or to locks (approx. 20...

Features Rectangular model • free passage when opened • the outlet is larger than the inlet, allowing unwanted materials to fall out freely • braking of a rotation in progress Valve plate • highly wear-resistant version made from hardened stainless steel • prepared so that switch sensors may be connected for limit position monitoring Valve plate guide • the guides in the front third are shortened, i.e. the valve plate guarantees a clearance • replaceable sliding rails made from bronze Sealing frame • protects the sliding plate and sliding plate guide • low-wear, material: SBR • plug-in...

Flange bores for LOHSE AEQ-valves with metric thread according to LOHSE standard Inlet site Z = total number of holes Z1 = number of joint-holes Z2 = number of through-going bores T = usable depth of thread

Type: AEQP/G Reject-Valves ) IPH5E' Inlet side Outlet side Z = total number of holes Z1 = number of joint-holes Z2 = number of through-going bores T = usable depth of thread

Reject-valve square in- and outlet pneumatic cylinder and protection guard Housing EN-GJL-250 or stainless steel Dimensions in mm, flange bores on request; air connection acc. VDI/VDE 3845 (NAMUR). Further sizes on request.

Type: AEQP/G Reject-Valves ) IPH5E' Reject-valve square in- and outlet pneumatic cylinder and protection guard Housing EN-GJL-250 or stainless steel Type: AEQP/G Reject-Valves ) IPH5E' Dimensions in mm, flange bores on request. Further sizes on request.

Austria (pulp + paper industry, wastewater + wastewater treatment Fr plants) + CZ, SK, SLO, SRB, HR, H Peter Reiter Handel Mazzetti-Str. 85 3100 St. Polten Phone: +43 (0) 27 42 / 7 73 66 Fax: +43 (0) 27 42 / 7 73 66