DuploCOLL® 92115 G
2Pages

{{requestButtons}}

Catalog excerpts

DuploCOLL® 92115 G - 1

Double-sided foam tape with special developed adhesive system for bonding on glass without pre-treatment (Activator) Product construction Name Polyethylene film Adhesive covered side Special adhesive Polyethylene foam Adhesive open side Pure acrylic Total thickness: approx. 1,60 Product advantages  The special developed adhesive system on the covered side enables a bonding on glass without pre-treatment (Activator).  The pure acrylic adhesive on the open side is characterized by a very good final adhesion and an excellent resistance against temperature, UV and weathering.  DuploCOLL® 92115 G with its compressible foam carrier is better in compensating component tolerances than hard foamed systems. The better surface wetting results in better adhesion.  The permanently elastic polyethylene foam allows the compensation of linear expansions due to different thermal coefficient of expansion of the substrates. Main application fields  Bonding of emblems, letterings and add-on parts on glass Specific technical data* Temperature range * Specific test results, statistically not approved.

Open the catalog to page 1
DuploCOLL® 92115 G - 2

Double-sided foam tape with special developed adhesive system for bonding on glass without pre-treatment (Activator) Technical Data Shear strength on steel according to DIN EN 1943, edition 1996, at +23 °C +/- 2°C open side 40 N/625mm² covered side 80 N/625mm² Peel strength on steel according to DIN EN 1939, edition 1996, at +23 °C +/- 2°C open side on glass according to DIN EN 1939, edition 1996, at +23 °C +/- 2°C Application Recommended application temperature Application guidelines Storage The shelf life at room temperature (15-25°C) and normal humidity (50-70 %) is 6 months after...

Open the catalog to page 2

All Lohmann catalogs and technical brochures

  1. Flexoguide

    14 Pages

  2. DuploFLEX 5

    6 Pages

  3. DuploFLEX3_4

    6 Pages

  4. DuploFLEX_CB

    6 Pages